Power ManagementのトピックRe: OTP configuration steps for MFS2633AMDA0AD

OTP configuration steps for MFS2633AMDA0AD

KiranTechX — Thu, 27 Mar 2025 06:27:57 GMT

Hi,

I want to upload the OTP configuration steps on MFS2633AMDA0AD. Without using the Programming Socket Board.

Thanks,

Re: OTP configuration steps for MFS2633AMDA0AD

TomasVaverka — Thu, 27 Mar 2025 07:27:07 GMT

Hi,

Our recommendation is using our NXP GUI tool and the FS26 Safety SBC Programming Socket Board (KITFS26SKTEVM) for your own OTP emulation/programming of the A0 variant during engineering development.

Then only NXP (large volumes) or a recommended third party (low volume) are allowed to program the device for production purposes.

For a visual overview of the OTP programming process, you might also find this video informative.

BRs, Tomas

Re: OTP configuration steps for MFS2633AMDA0AD

KiranTechX — Thu, 27 Mar 2025 07:45:50 GMT

Hi,

Thank you for your response. We currently have only one board with the MFS2633AMDA0AD for POC. At this moment, we are unable to procure the FS26 Safety SBC Programming Socket Board. While we can consider it for mass production, we would like to explore an alternative solution for resolving this issue.

Would it be possible to configure the OTP using another EVK via SPI?

Looking forward to your guidance.

Best regards,
Kirankumar Chincholi