UJA1169 can meet ASIL-B?

Lurkersoo — Fri, 26 Apr 2019 09:44:28 GMT

Hello, I would like to know if UJA1169 can meet ASIL-B? I can't find any information from the datasheet about it.

Thanks!

Best Regards,

Shaowei

Re: UJA1169 can meet ASIL-B?

TomasVaverka — Fri, 26 Apr 2019 12:28:56 GMT

Hello Shaowei,

When the UJA1169 was developed, ISO26262 was not in use. In ISO26262 terminology, this means that the type is Quality Managed and does not have an ASIL-B level.

Relevant for ASIL levels is the failure rate:

Based upon lifetesting, in the amounts as prescribed by AEC-Q100, with 0 failures found, we can calculate a failure rate <10FIT, with 60% Confidence Level, at a junction temperature of 55°C. This failure rate equals an MTBF > 100M hours.

Based upon justified field returns, so excluding EOS/ESD and NTF, we can calculate an experienced field failure rate < 1FIT. For this calculation we assume 1.5 hours of operation per day, for each delivered product, this equals a typical automotive profile.

Best regards,

Tomas

PS: If this answer helps to solve your question, please mark it as "Correct" or “Helpful”. Thank you.

topic UJA1169 can meet ASIL-B? in Power Management

UJA1169 can meet ASIL-B?

Re: UJA1169 can meet ASIL-B?