https://community.nxp.com/t5/Power-Management/Overcurrent-protection-in-NX20P5090/m-p/1465801#M1957 <P>Maximum continuous output current for NX20P5090 is 5A. Is there any overcurrent protection feature for this load switch? What happens if a short-circuit occur at the output load? Thanks.</P> Sat, 28 May 2022 08:29:42 GMT Danz1 2022-05-28T08:29:42Z https://community.nxp.com/t5/Power-Management/Overcurrent-protection-in-NX20P5090/m-p/1465801#M1957 <P>Maximum continuous output current for NX20P5090 is 5A. Is there any overcurrent protection feature for this load switch? What happens if a short-circuit occur at the output load? Thanks.</P> Sat, 28 May 2022 08:29:42 GMT https://community.nxp.com/t5/Power-Management/Overcurrent-protection-in-NX20P5090/m-p/1465801#M1957 Danz1 2022-05-28T08:29:42Z https://community.nxp.com/t5/Power-Management/Overcurrent-protection-in-NX20P5090/m-p/1465856#M1958 <P>There is no over current protection,it used in USB PD terminal if happened on short event,the PD terminal will prevent.&nbsp;</P> Mon, 30 May 2022 00:12:01 GMT https://community.nxp.com/t5/Power-Management/Overcurrent-protection-in-NX20P5090/m-p/1465856#M1958 guoweisun 2022-05-30T00:12:01Z https://community.nxp.com/t5/Power-Management/Overcurrent-protection-in-NX20P5090/m-p/1469120#M1987 <P>Thanks, Guowei.</P> Mon, 06 Jun 2022 04:44:43 GMT https://community.nxp.com/t5/Power-Management/Overcurrent-protection-in-NX20P5090/m-p/1469120#M1987 Danz1 2022-06-06T04:44:43Z