Power ManagementのトピックRe: kitpfgui(Version 4.1)

kitpfgui(Version 4.1)

User_mmpf — Tue, 17 May 2022 07:36:14 GMT

Hi,

I am using the kitpfgui(Version 4.1) for the first time. I have not yet connected the target board. For now, I am trying to observe voltage and current values of the PMIC on kit. But whenever I am enabling the target device, the GUI hangs. I have tried the software in Windows 7 and 10. Screenshot attached. Any procedure that I am doing wrong?

Thanks for the help in advance!

Re: kitpfgui(Version 4.1)

guoweisun — Tue, 17 May 2022 08:16:49 GMT

You must connect with the EVB then click Enable.

Re: kitpfgui(Version 4.1)

User_mmpf — Tue, 17 May 2022 08:39:19 GMT

If only contents of PMIC on kit has to be checked, what should be done?

Currently I want to verify the sequencing alone.

Re: kitpfgui(Version 4.1)

guoweisun — Tue, 17 May 2022 08:46:02 GMT

You can connect with EVB then click 'OTP configuration' then give me the picture.

Re: kitpfgui(Version 4.1)

User_mmpf — Tue, 17 May 2022 08:51:24 GMT

We do not have a EVB currently. Target board is yet to be fabricated. I am using this kit to get familiar with working of the PMIC and verify sequencing.

Re: kitpfgui(Version 4.1)

guoweisun — Tue, 17 May 2022 08:57:17 GMT

I remembered that you can try to click 'OTP configuration' then click 'update from socket',you can get your desired sequence.

Re: kitpfgui(Version 4.1)

User_mmpf — Tue, 17 May 2022 09:01:40 GMT

I am unable to navigate to any tabs in the GUI. Is it possible to have the previous version for download?

Re: kitpfgui(Version 4.1)

guoweisun — Tue, 17 May 2022 09:04:10 GMT

Because you don't have EVB or socket connection,so you can't navigate it!