topic Re: FS6510 Can't set IMPACT register in Power Management

FS6510 Can't set IMPACT register

Jamber_H — Tue, 20 Jul 2021 09:09:32 GMT

After Power-On, the SBC is in Init mode, I set INIT_VAUX_OVUV_IMPACT register as 0xA, after 200us, I read back it, but the result is 0x0, which is not equal to the value I set. What's the reason?

Re: FS6510 Can't set IMPACT register

TomasVaverka — Tue, 20 Jul 2021 11:47:41 GMT

Hi,

Please try to close the INIT_FS with at least 1 good WD refresh and then read back the INIT_VAUX_OVUV_IMPACT register.

Best regards,

Tomas

Re: FS6510 Can't set IMPACT register

Jamber_H — Tue, 20 Jul 2021 12:09:24 GMT

Hi, Tomas,

I tried that, I read this register periodly after I set it in INIT phase. In Normal phase, the value is not 0x0, but it's a default value as 0xE.

Best regards,

Jamber

Re: FS6510 Can't set IMPACT register

Jamber_H — Wed, 21 Jul 2021 12:00:11 GMT

HI, could you help me?