topic How to download program in normal mode(not in debud mode)? in Power Management

How to download program in normal mode(not in debud mode)?

dingsg — Wed, 29 Jul 2020 06:01:10 GMT

hi !

I have a question about FS65xx when I download program.when I use FS65xx to supply power MCU in normal mode(not in debug mode),if i want to downloade a new program by using bootloader ,what should i do? And now I use IO port to pull up DEBUG pin in bootloader ,and release it in APP when download process is finished. Because I don't want to feed dog in download process. How should I operate FS65 in bootloader and it will meet functional safety requirments.

Thanks!

Re: How to download program in normal mode(not in debud mode)?

guoweisun — Mon, 03 Aug 2020 01:37:37 GMT

What kind of MCU platform do you select in your system?

Re: How to download program in normal mode(not in debud mode)?

dingsg — Mon, 03 Aug 2020 01:50:06 GMT

Hi !

There are two kinds of MCU Platform, they are MPC5775E and Infineon Aurix TC38x.

When using the two platforms, is there any difference in the function usage of fs65 ?

Thanks!

Re: How to download program in normal mode(not in debud mode)?

guoweisun — Mon, 03 Aug 2020 01:56:16 GMT

This is MCU MPC5775 related questions,I send your driver code based on MPC5774 platform, hope could help you!

Re: How to download program in normal mode(not in debud mode)?

dingsg — Mon, 03 Aug 2020 02:06:24 GMT

Thank you for your reply!

I have a question ,Could you tell me if we need to feed watchdog when we download the program? if needn't ,how should we deal with the Debug pin?

Re: How to download program in normal mode(not in debud mode)?

guoweisun — Mon, 03 Aug 2020 02:09:12 GMT

Download program in debug mode,no need to feed watchdog.

Re: How to download program in normal mode(not in debud mode)?

dingsg — Mon, 03 Aug 2020 02:15:43 GMT

When we download program ,we use IO port to pullup Debug pin and release the pin in application after download process has been finished, Does this approach meet functional safety requirements?

Re: How to download program in normal mode(not in debud mode)?

dingsg — Mon, 03 Aug 2020 03:59:14 GMT

When fault occurs , it can only be cleared by watchdog refresh ?

Re: How to download program in normal mode(not in debud mode)?

guoweisun — Mon, 03 Aug 2020 04:22:09 GMT

你说的什么种类的错误？

Re: How to download program in normal mode(not in debud mode)?

dingsg — Mon, 03 Aug 2020 04:36:12 GMT

过压故障产生后故障错误计数器会增加，这时候应该怎么清除故障呢

Re: How to download program in normal mode(not in debud mode)?

guoweisun — Mon, 03 Aug 2020 04:44:16 GMT

你的电话是多少？

Re: How to download program in normal mode(not in debud mode)?

dingsg — Mon, 03 Aug 2020 04:59:10 GMT

座机电话：021-34978900 转 8740

手机号码：15821852057

Re: How to download program in normal mode(not in debud mode)?

dingsg — Tue, 04 Aug 2020 01:30:53 GMT

你好！我们在第一次烧写程序的时候，这时候即不能通过MCU去控制debug引脚，也不能实现正常喂狗，应该如何做操呢？

Re: How to download program in normal mode(not in debud mode)?

guoweisun — Tue, 04 Aug 2020 01:34:43 GMT

这样只能自己做外围的电路，上电默认满足进入debug模式

Re: How to download program in normal mode(not in debud mode)?

xupei — Tue, 20 Apr 2021 11:33:05 GMT

Hello，

After reading it, I still don't understand the title question。

How to download program in normal mode(not in debud mode，e.g thru CAN )?thanks

"The watchdog refresh can be disabled during INIT_FS state of the fail-safe logic to allow programming without taking care of the watchdog refresh. INIT_FS can be entered by a reset request with RSTB_REQ bit in SF_OUTPUT_REQUEST register."The above is described in the guideline.