Other ConnectivityのトピックRe: UWB: Two-way ranging measurements with 0x21 status (Ranging RX timeout)

UWB: Two-way ranging measurements with 0x21 status (Ranging RX timeout)

ver-kapi — Tue, 30 Apr 2024 05:32:52 GMT

Hi,

I am in the process of porting the UWB middleware to the Zephyr-RTOS environment for my product needs. I can complete the UWB establishment procedure with the iOS peer over Bluetooth and initialize the UWB session. However, after I start ranging with the iOS peer, every UWB ranging measurement (two-way) contains invalid distance data (0xFF 0xFF) and the 0x21 status code, which maps to the RX ranging timeout.

Do you have any advice on what I might be missing in my project? Is there anything in particular that I should double-check for this particular issue?

Re: UWB: Two-way ranging measurements with 0x21 status (Ranging RX timeout)

Ricardo_Zamora — Tue, 30 Apr 2024 18:41:00 GMT

Hello,

Hope you are doing well. You are using a Module/Kit from one of our Trimension UWB Partners, right?

In that case, you would need to go directly with them to receive support for their Module/Kit.

I apologize for the inconveniences.

Regards,

Ricardo