Other ConnectivityのトピックRe: UWB Leading Edge Detection with CIR

UWB Leading Edge Detection with CIR

R0zi — Mon, 03 Jun 2024 13:11:58 GMT

Hello,

I am currently working with NXP's UWB devices and have a few technical questions regarding the leading edge detection algorithms:

1. Are the leading edge detection algorithms used in NXP's UWB devices proprietary and confidential?
2. Is it possible to access the raw Channel Impulse Response (CIR) data directly from the hardware?
3. Can the leading edge detection algorithms be modified or adjusted through any available interfaces?

Any insights or detailed information on these points would be greatly appreciated.

Thank you!

# Product: UWB NCJ29D5 # Protocol: 802.15.4

Re: UWB Leading Edge Detection with CIR

Ricardo_Zamora — Mon, 03 Jun 2024 20:17:55 GMT

Hello,

Hope you are doing well. Sorry for the inconvenience this might cause you but as the information of this product it's under NDA (Non-Disclosure Agreement) the information it's not public, this is not a secure channel to share any information of this device and I do not have the data as well for the same reason.

For more information about the chip could you please contact one of our distributors available in the Distributor Network|NXP? Or if you have a direct contact who helped you with information about this product in a first place, please communicate with him/her.

Regards,

Ricardo