MQX Software SolutionsのトピックI need to send a raw packet to the stack.

I need to send a raw packet to the stack.

namile — Fri, 07 Mar 2014 14:08:00 GMT

I need to send a raw packet to the stack. I am using MQX 3.8 with Kinetis K60.

Re: I need to send a raw packet to the stack.

danielchen — Tue, 11 Mar 2014 07:50:38 GMT

Hi Rajesh:

Currently, raw socket is not supported by RTCS, we have it on TODO list

Have a great day,
Daniel

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: I need to send a raw packet to the stack.

vinayshanwad — Wed, 25 Mar 2015 06:34:45 GMT

Can u please let me know where do i get this todo list?

Re: I need to send a raw packet to the stack.

cencongsu — Tue, 01 Mar 2016 10:40:15 GMT

It is still on the TODO list?

So disappointed about this product.

Re: I need to send a raw packet to the stack.

soledad — Tue, 01 Mar 2016 21:46:49 GMT

Hello,

Thank you for your feedback.

Unfortunately MQX APIs does not support raw sockets. However you can modify the library according your needs. You should look inside RTCS stack the way it works with network interfaces, or to inside ENET driver.

I would like to recommend look at MACNET_RX_ISR interrupt routine in macnet_receive.c file.

This is place where we receive interrupt from ENET module and we can start with processing of such data (like check of MAC address and verification of CRC)

Unfortunately, any change on the MQX or any library as RTCS is out of the free support scope.

Sorry for any inconvenience that may cause.

Have a great day,
Sol