MQX Software SolutionsのトピックRe: mfs_usb HOST Problem

mfs_usb HOST Problem

SUNU — Tue, 24 Apr 2012 16:58:14 GMT

Hi,

I am using k70 demo board ,3.8 MQX and 10.2 Codewarrior .On demo board USB port is working properly in "4 GB" pen drive.But i add upto 4 GB drive it not working ,what i do for this problem ,the error message coming on hyperterminal is (i am using 32 GB hard drive).

Error while opening partition (UNKNOWN ERROR !!!)
Device removed, starting device cleanup
--->Closing MFS
--->Uninstalling û
--->Uninstalling PM
--->Closing disk
--->Closing USB MFS

Re: mfs_usb HOST Problem

mattvario — Thu, 12 Jul 2012 02:29:30 GMT

Did you ever get an answer to your question? I am having the same symptom when connecting a USB memory stick to my target which is running on the K70.

Re: mfs_usb HOST Problem

c0170 — Fri, 13 Jul 2012 15:31:31 GMT

Hello,

We have tested mfs_usb on MQX 3.8.1 with 8GB pen drive and it run without any error. This MQX version is going to be released this month.

Regards,

MartinK

Re: mfs_usb HOST Problem

mattvario — Wed, 18 Jul 2012 21:53:45 GMT

I have a preliminary release of MQX 3.8.1 and it did not solve our problem. The symptom is the same, we still get an Error while opening partition (UNKNOWN ERROR !!!).

Re: mfs_usb HOST Problem

Vagni — Tue, 24 Jul 2012 14:16:05 GMT

Dear MartinK,

I am developing with MQX 3.7 and I have to add USB MSD Host functionality to my running application on my K60-based custom board.

Should I get the same issue with 4GB and over memory stick with that MQX version ?

Should I port my application to the new MQX 3.8.1 ?

Re: mfs_usb HOST Problem

c0170 — Thu, 26 Jul 2012 15:15:06 GMT

Hi vagni,

I would suggest to install 3.8.1 and test the examples which are similar/have same functionality that your application desires.

Regards,

MartinK

Re: mfs_usb HOST Problem

Vagni — Thu, 02 Aug 2012 21:58:50 GMT

Dear MartinK,

I downloaded and installed MQX 3.8.1. I got a TWR-K60N512 + TWR-SER Tower System and I compiled and run the mfs-usb demo application with my CW 10.2.

The demo mounts the file system on 2GB, 4GB and 8GB pendrives, but for a 16GB pendrive I get the same opening partition error (UNKNOWN ERROR !!!).

I added to the demo code a test function that, when the file system is succesfully mounted, opens a text file for writing (fopen with "w"), writes a string on it (fputs), close the file (fclose), re-opens the same text file for reading (fopen with "r"), gets the first string from the file (fgets), closes the file (fclose) and compares the written string with the read one.

This test is succesfully on 2GB and 4GB pendrives, but on a 8GB pendrive the fgets() never returns and my function never ends.

P.S. - In the past I got the same file system issue (not mounted on pendrives with size over 4GB) with the AN4368 USB MSD Host Bootloader. Then, I got an updated version from the Freescale Support that fixed the issue. Unfortunately, the USB-Host stack and the file system used in AN4368 are not the same as MQX USB-Host and MFS ...

Re: mfs_usb HOST Problem

barbercolman — Wed, 28 Nov 2012 16:57:35 GMT

Has this issue been resolved. I assume you are using C:\Freescale\Freescale MQX 3.8\mfs\examples\mfs_usb. Is this correct? Also were you using a USB flash drive and how did you connect it?

Thanks

Re: mfs_usb HOST Problem

JuroV — Tue, 11 Dec 2012 09:29:19 GMT

Hi Alessandro,

during development of MQX 4.0, we had USB plug fest where many issues with USB flash disks have been solved and I can now say that MQX 4.0 is the most compatible with USB flash disks spread over world than any previous MQX release. Please try MQX 4.0 that is scheduled for release within few days if the mfs_usb example works with your pen drive.

There are also plans to prepare public information of tested and working USB disks with MQX.

Re: mfs_usb HOST Problem

ARQuattr — Tue, 15 Oct 2013 22:04:55 GMT

Hi Juraj,

You mentioned plans to publish results of your plug fest. Do you know if this has been done, and where it can be found?

Thanks