MQX Software SolutionsのトピックRe: undefine __boot

undefine __boot

Swapnil_Enable — Mon, 14 Jan 2013 10:57:14 GMT

During compling i suddenly got this error. and i don't know how to remove it?

please help understand and solve it.

Re: undefine __boot

Teckna — Mon, 14 Jan 2013 11:35:55 GMT

Hi,

in project properties you must define entry point as __boot

Regards

Re: undefine __boot

Swapnil_Enable — Mon, 14 Jan 2013 11:47:07 GMT

i checked it the project setting - > c/c++ build -- > setting --> entry id __boot.

anywhere else do i have to look?

Re: undefine __boot

Teckna — Mon, 14 Jan 2013 11:54:28 GMT

Which compiler are you using?

In CW the path is C/C++ bulid/settings/ARM Linker/Input/Entry Point

Are you using MQX?

Label __boot is used in PSP!!

Re: undefine __boot

Swapnil_Enable — Mon, 14 Jan 2013 12:16:56 GMT

i am using CW 10.3 with MQX 3.8.1

i checked the same location u referred " C/C++ bulid/settings/ARM Linker/Input/Entry Point ".

if i create any new project it also have the same problem.

Re: undefine __boot

Swapnil_Enable — Mon, 14 Jan 2013 12:40:48 GMT

i recompiled the psp and i could get the error from newly created project removed after compilation. but the error stays in with my project.

Re: undefine __boot

Martin_ — Mon, 14 Jan 2013 13:16:26 GMT

Try clean build of your project. The error message might remain in the "Problems" window from previous builds.

Re: undefine __boot

Teckna — Mon, 14 Jan 2013 13:35:15 GMT

In my project with CW10.3, MQX 3.8.1 and Entry Point as "__boot" it works!

I create also a new project and it works!

I attach screenshot of my linker options

Re: undefine __boot

Swapnil_Enable — Tue, 15 Jan 2013 06:29:25 GMT

Thanks all of you. i added Additional libraries in properties as seen in screen shot and the error are gone... now what exactly was the problem still unknown...

thanks again Martin and teckna

Re: undefine __boot

randybulloch — Sat, 28 Dec 2013 19:16:45 GMT

Hi All,

I also have this problem which occurs in a previously working project. Everything in the thread matches my symptom and I understand until the posted screen shot showing the "Additional Libraries". I just cannot find where this libraries exist and do not know how to add to my project to try the fix. I am using CW10.4, MQX 4.0.2. I also saw the problem with CW 10.5.

How do I add these libraries to my link?