MQX Software Solutions中的主题 Re: Wifi solution

Wifi solution

Dario — Fri, 03 Jul 2009 22:12:14 GMT

Hello

I looking for wifi solutions using MQX TCP/IP stack.

I've seen that currently is on development a 802.11b WiFi ZeroG-based module for the Tower System.

http://www.freescale.com/webapp/sps/site/overview.jsp?nodeId=05521067406B48

I want to know if that solution would be ported for MQX and for wich Microcontroller and wich ZeroG mudule use.

Regards,

Re: Wifi solution

PetrL — Fri, 10 Jul 2009 19:02:07 GMT

Hi,

Wifi card will most likely use ZG2101MC module and we are starting with MCF52259 MCU port.

Then all TWR MCUs should be supported.

Regards,

PetrL

Re: Wifi solution

Chris_UTS — Sat, 05 Sep 2009 08:53:58 GMT

Hi,

Is there any updated information or expected dates about the ZeroG module and integration with MQX? We are extremely interesting in adding wireless ethernet to our MCF52259 application.

Thank you.

Chris

Re: Wifi solution

PetrL — Thu, 01 Oct 2009 01:33:02 GMT

Hi,

ZeroG Driver for MCF52259 Tower Board + ZeroG extension board should be released at beginning of November 2009.

Regards,

Petr

Re: Wifi solution

hwg — Sat, 03 Oct 2009 15:32:20 GMT

The Wifi solution essentially requires a TCP/IP stack implementation over 802.11 b/g. Will the MQX/RTCS stack be upgraded to support TCP/IP over the ZeroG module on MCF5225x platform? The latest V 3.3.0 of MQX/RTCS does not support Wifi.

Re: Wifi solution

JuroV — Fri, 09 Oct 2009 16:37:24 GMT

Yes, it will be in the HW level of the stack.

Re: Wifi solution

CarlFST60L — Tue, 17 Nov 2009 12:46:11 GMT

Hi,

how is this going?

I have just gotten out of a meeting and the directors have decided we need to add Wifi to out 52259.

Does anyone know how much this ZeroG module is worth? And is the driver ready for testing?

I have been looking at the Redpine Signals wifi module (RS9110-N-11-22), it seems quite simple, though, I would need to someone have the RTCS communicate over SPI. Is it difficult to get MQX's RTCS to talk over SPI to the Wifi module?

Message Edited by CarlFST60L on 2009-11-17 04:48 AM

Re: Wifi solution

PetrL — Sun, 22 Nov 2009 21:47:17 GMT

Hi,

ZeroG Wifi MQX driver is finished will be released soon.

ZeroG driver is part of current ENET driver. It uses standard SPI driver for communication with wifi module.

RTCS stack is prepare to communicate with devices which implements standardized interface API. This API implements ENET driver. You can find enet driver source code in "mqx\source\io\enet\..."

If you want to implement your custom ENET wifi driver you need to prepare custom service routines for your HW and pass them to ENET_PARAM_STRUCT initialization structure (bsp enet_ini.c file).

These routines must impelement similar functionality as current FEC and ZeroG driver provides (functions like send, shutdown, join, rejoin see ENET_MAC_IF_STRUCT, ENET_PHY_IF_STRUCT structs and "mqx\source\io\enet\mcf5xxx_fec" sources).

PetrL

Message Edited by PetrL on 2009-11-22 01:55 PM

Re: Wifi solution

hwg — Sun, 14 Feb 2010 10:05:53 GMT

Support for ZeroGwireless module in Tower system and also in MQX/RTCS V 3.5.0 (if it was previously available in V 3.4.0) appears to have been removed. There is no more mention of Wifi on Tower System Webpage. Is there any issue with it?

Re: Wifi solution

Nouchi — Mon, 15 Feb 2010 16:11:40 GMT

Hello,

ZeroGwireless seems to be bought by MicroChip, it could be explained that!

Emmanuel

Re: Wifi solution

hwg — Tue, 16 Feb 2010 09:34:02 GMT

That may explain.

Does Freescale have any alternate plan form Wifi for Tower/MCF52259/MQX? Any schedule for its offering?

Best Regards,

Re: Wifi solution

vier_kuifjes — Wed, 17 Feb 2010 19:52:17 GMT

It would be nice to have a Wifi device that connects to the MII interface directly, not via SPI. I'm not sure if such a device exists though...

Re: Wifi solution

ARQuattr — Tue, 07 Sep 2010 11:28:22 GMT

I was hoping to see more development on this.

Marc VDH, I found a wi-fi module that supposedly will connect to the RMII:

http://www.connectone.com/products.asp?did=39&pid=88

I think I might give this a try, unless someone knows of a farily well-developed solution for MQX on the Coldfire V2?

Re: Wifi solution

vier_kuifjes — Tue, 07 Sep 2010 13:10:08 GMT

Interesting info, thanks!

Please keep us informed when you give it a try! :smileyhappy: