topic Re: mqx.h version 3.8 in MQX Software Solutions

mqx.h version 3.8

Tgomes — Thu, 12 Jul 2012 00:31:15 GMT

Hello there,

I am porting my application from MQX 3_6 to MQX 3_8, and noticed in the file mqx.h, in the "MEMORY TYPES MQX", there is the following piece of code:

# define MEM_TYPE_IO_USB_DCD_INFO_STRUCT                             1045
# define MEM_TYPE_IO_USB_DCD_POLLED_DEVICE_STRUCT     1046
# define MEM_TYPE_IO_USB_DCD_INT_DEVICE_STRUCT               1047
# define MEM_TYPE_IO_SDIO_INT_DEVICE_STRUCT                         1045
# define MEM_TYPE_IO_SDIO_IN_BUFFER                                             1046
# define MEM_TYPE_IO_SDIO_OUT_BUFFER                                        1047

Note that the first 3 are equal to the last three. Those types of memory are really the same? Or this was an error of type "Ctrl + c Ctrl + v"?

Best regards.

Re: mqx.h version 3.8

c0170 — Thu, 12 Jul 2012 15:40:08 GMT

Hi Tgomes,

nice catch, fix this by ascending numbering:

# define MEM_TYPE_IO_SDIO_INT_DEVICE_STRUCT                         1048
# define MEM_TYPE_IO_SDIO_IN_BUFFER                                             1049
# define MEM_TYPE_IO_SDIO_OUT_BUFFER                                         1050

It's been fixed.

Regards,

MartinK

Re: mqx.h version 3.8

Tgomes — Fri, 13 Jul 2012 00:37:45 GMT

Hi MartinK,

Thanks for clarifying my question. Other two types of memory are also defined with the same value:

MEM_TYPE_MESSAGE_POOL_BLOCKS 12
MEM_TYPE_COMPONENT_SHIFT 12

MEM_TYPE_COMPONENT_SHIFT also must follow the ascending order? Or it should remain the same, since it was explicitly set apart from others.

Best regards.

Re: mqx.h version 3.8

c0170 — Fri, 13 Jul 2012 14:39:06 GMT

Hi Tgomes,

those 2 defines are OK.

Regards,

MartinK

Re: mqx.h version 3.8

Tgomes — Fri, 13 Jul 2012 19:57:40 GMT

Ok, thanks MartinK.

Best regards.