MQX Software Solutions中的主题 Unused interrupts. https://community.nxp.com/t5/MQX-Software-Solutions/Unused-interrupts/m-p/169999#M1863 <HTML><HEAD></HEAD><BODY><P>I have a new to using MQX version 3.7&nbsp; and CW 10.1, I have a working project using a mcf51jm and I have not found documentation on how MQX handles unused interrupts. In smaller project, with out a RTOS I either wrote a handler that rerecorded an exception in a error log or forced a watchdog.</P><P>&nbsp;</P><P>Any suggestion on how to handle, assuming MQX does not handle unused interrupts?</P></BODY></HTML> Mon, 26 Sep 2011 21:24:52 GMT barbercolman 2011-09-26T21:24:52Z Unused interrupts. https://community.nxp.com/t5/MQX-Software-Solutions/Unused-interrupts/m-p/169999#M1863 <HTML><HEAD></HEAD><BODY><P>I have a new to using MQX version 3.7&nbsp; and CW 10.1, I have a working project using a mcf51jm and I have not found documentation on how MQX handles unused interrupts. In smaller project, with out a RTOS I either wrote a handler that rerecorded an exception in a error log or forced a watchdog.</P><P>&nbsp;</P><P>Any suggestion on how to handle, assuming MQX does not handle unused interrupts?</P></BODY></HTML> Mon, 26 Sep 2011 21:24:52 GMT https://community.nxp.com/t5/MQX-Software-Solutions/Unused-interrupts/m-p/169999#M1863 barbercolman 2011-09-26T21:24:52Z Re: Unused interrupts. https://community.nxp.com/t5/MQX-Software-Solutions/Unused-interrupts/m-p/170000#M1864 <HTML><HEAD></HEAD><BODY><P>By default MQX will block the task that was running when an unused interrupt occurs.&nbsp; If you want to display details of the interrupt call _int_install_unexpected_isr(); right at the beginning of your application this will display the vector of the unused interrupt on the console.</P></BODY></HTML> Tue, 27 Sep 2011 02:21:45 GMT https://community.nxp.com/t5/MQX-Software-Solutions/Unused-interrupts/m-p/170000#M1864 Ed_EmbeddedAcce 2011-09-27T02:21:45Z