MQX Software SolutionsのトピックRe: ethernet working on mqx 4.2

ethernet working on mqx 4.2

Abil — Fri, 12 Feb 2016 09:50:38 GMT

hi all,

am using FRDM k64 with MQX 4.2 and code warrior 10.6...i have build RTCS library and tried to build example code..ya its working perfectly...but if i tries to make it run from my tasks or functions its working only from one side..ie. from TCP to serial....can anyone suggest how to do it?

Re: ethernet working on mqx 4.2

danielchen — Mon, 15 Feb 2016 02:25:47 GMT

Hi shweta:

Could you please attach your code ,so we can reproduce your issue?

Regards

Daniel

Re: ethernet working on mqx 4.2

Abil — Mon, 15 Feb 2016 05:39:43 GMT

i have attached my code here....am calling this functions rx_task and

tx_task() from task in main

On Mon, Feb 15, 2016 at 7:56 AM, danielchen@fsl <

Re: ethernet working on mqx 4.2

danielchen — Thu, 18 Feb 2016 08:05:41 GMT

Hi shweta:

Since your functions can only work from TCP to serial, I suggest you check the tx_task. there is only one send function in this task, whether the input parameter is valid?

Regards

Daniel