topic Re: cdc virtual_com example not working on Kwikstik in MQX Software Solutions

cdc virtual_com example not working on Kwikstik

mpc8377e — Mon, 19 Mar 2012 15:48:45 GMT

Hi,

I am trying to run CDC virtual_com example on K40 Kwikstik board. I can send data from host (windows xp) to device and can print the data received but the data sent from device is not received by the host.

The same example works fine on k40 Towermoulde.

Any solutions for this problem.

Regards,

Raghu

Re: cdc virtual_com example not working on Kwikstik

c0170 — Thu, 05 Apr 2012 14:26:25 GMT

Hi mpc8377e,

does your problem persist or any progress made? I'll test that example and get back to you with the result.

Regards,

MartinK

Re: cdc virtual_com example not working on Kwikstik

BlackNight — Wed, 30 May 2012 02:44:51 GMT

Hi there,

for information: I have the same problem: I can send data from the host to the KwikStik, but cannot send from the KwikStik to the host:

https://community.freescale.com/message/112100#112100

Re: cdc virtual_com example not working on Kwikstik

BlackNight — Wed, 30 May 2012 18:39:32 GMT

Hello,

good news: my problem has been solved with the attached .inf file :smileyhappy:.

Re: cdc virtual_com example not working on Kwikstik

MarkP_ — Mon, 23 Sep 2013 12:45:27 GMT

Hi,

same problem with MQX4.0 and CW10.4.

Does that inf-file change fix it?

Where can I get it?

~Mark