MQX Software SolutionsのトピックRe: Problem MQX-3.8 i2c example (Master) on a MK60DN512VLL10 (100 Pin version)

Problem MQX-3.8 i2c example (Master) on a MK60DN512VLL10 (100 Pin version)

uweboettger — Wed, 13 Jan 2016 15:30:38 GMT

Hi,

I try to run
the MQX-3.8 i2c example (Master) on a MK60DN512VLL10 (100 Pin version).

A EEPROM
24LC16BT-I is correct connected to PortB2/B3.

All MQX
Settings/Files are default for TWRK60D100m.

In SW I
changed:

PORTB_PCR2=PORT_PCR_MUX(2)|PORT_PCR_ODE_MASK; // I2C0_SCL

PORTB_PCR3=PORT_PCR_MUX(2)|PORT_PCR_ODE_MASK; // I2C0_SDA

SIM_BASE_PTR->SCGC4
|= SIM_SCGC4_I2C0_MASK;

PORTB_PCR0=PORT_PCR_MUX(0); // I2C0_SCL

PORTB_PCR1=PORT_PCR_MUX(0); // I2C0_SDA

PORTB_PCR2=PORT_PCR_MUX(2); // I2C0_SCL

PORTB_PCR3=PORT_PCR_MUX(2); // I2C0_SDA

Nothing
happen on port pins and it never leave :

_ki2c_polled_rx_tx()

{

i2csr = i2c_ptr->S;

if (0 == (i2c_ptr->C1 &
I2C_C1_MST_MASK))

{

if (i == length)

{

return i;

}

if ((io_info_ptr->OPERATION &
I2C_OPERATION_STARTED) && (0 == (i2csr & I2C_S_BUSY_MASK)))

{

io_info_ptr->OPERATION = 0;

io_info_ptr->RX_REQUEST = 0;

io_info_ptr->STATE = I2C_STATE_FINISHED;

return i;

}

} while (0 == (i2csr
& I2C_S_IICIF_MASK));

What I have
to change in SW?

BR Uwe

Re: Problem MQX-3.8 i2c example (Master) on a MK60DN512VLL10 (100 Pin version)

soledad — Wed, 13 Jan 2016 21:46:02 GMT

Hello Uwe,

If you want to use the MQX I2C driver and you need to change the default i2c pins, it is necessary to modify the init_gpio.c file, this file is located at the path:

C:\Freescale\Freescale MQX 3.8\mqx\source\bsp\twrk60n512

After that you need to rebuild the BSP and PSP.

At the path C:\Freescale\Freescale MQX 3.8\mqx\examples you can find an example for i2c, this example shows how to read/write data from/to external SPI EEPROM.

Please let me know if this helps!!

Have a great day,
Sol

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Problem MQX-3.8 i2c example (Master) on a MK60DN512VLL10 (100 Pin version)

uweboettger — Thu, 14 Jan 2016 15:48:20 GMT

Hello Sol,

my i2c Driver is OK now.

Thanks!

BR Uwe