RTCS_FD_CLR() function

emanueletrapani — Wed, 09 Dec 2015 11:20:47 GMT

hi, i migrated from mqx 4.1 to mqx4.2, i use CW 10.6 and frmk64f.

in my application i used the RTCS_selectset() functionand it work properly; i read in the documentation of the rtcs that is recommended the use of the select() function. i seen the example and i try to use it with some changes. everything is ok till i use the RTCS_FD_CLR() function.

my application comunicates with my pc so i use a set of socket and i must check the activity of those sockets. i'm inside a while cycle and sometimes i need to add or remove a socket from the set. adding socket happens correctly but when i try to remove the socket from the set i have some problems:

-if i use the RTCS_FD_CLR() function, when the cycle come again on the select() function it return a error 0x1716 that in rtcs_err.h is RTCSERR_SOCK_EBADF. I seen that is a error returned when the select() function check if the socket is in the socket set.

if i do not use the RTCS_FD_CLR(), the select() function return the same error.

so my question is: there is a way to use correctly the RTCS_FD_CLR() function? or there is a way to know if i use correctly this function?

now i'm trying to clear all the set and i add again all the socket i need.

a very semplified version of my cycle is:

while(1){
     err=select(active_socket_number,&sock_set,NULL,NULL, 0);
     ...
     else{
          if(RTCS_FD_ISSET(serv_sock, &sock_set)){
               accept(...);
               RTCS_FD_SET(sock,&sock_set);
               active_socket_number++;
               ...
          } else {
               rx_count=recv(sock,buf,buf_size);
               if (rx_count==RTCS_ERROR) {
                    RTCS_FD_CLR(sock,&sock_set)
                    closesock(sock);
                    active_socket_number--;
                    ...
               }
          ...
          }
     ...
}

ps: i use multiple select() function of different set of sockets in different task. But those different set may contain the same socket. can this be the problem?

Re: RTCS_FD_CLR() function

Martin_ — Thu, 10 Dec 2015 13:35:07 GMT

select() changes the sock_set when it returns. Therefore you must to re-fill sock_set before select() each time it is called - in every while cycle.

while(1)

{

RTCS_FD_ZERO(&sock_set);

RTCS_FD_SET(sock1, &sock_set);

RTCS_FD_SET(sock2, &sock_set);

select(...)

}

You can have two sets. In one set you could keep the active sockets (add a connected client, remove disconnect client). And then before select() you just copy this set to another which is given to select():

while(1)

{

memcpy(&sock_set, &sock_set_init, sizeof(rtcs_fd_set));

select(..&sock_set.)

RTCS_FD_SET(client_sock, &sock_set_init); /* add established socket */

RTCS_FD_CLEAR(client_sock, sock_set_init); /* remove closed socket */

}

Re: RTCS_FD_CLR() function

emanueletrapani — Fri, 11 Dec 2015 07:43:16 GMT

thank you martin!

i resolved using one select() for one socket! but your solution is better! i keep in mind for the next time!

have a nice day!

topic Re: RTCS_FD_CLR() function in MQX Software Solutions

RTCS_FD_CLR() function

Re: RTCS_FD_CLR() function

Re: RTCS_FD_CLR() function