select() on *FILE->_FD + nonblocking read

Novalis — Mon, 02 Nov 2020 13:20:14 GMT

Hello,

is it possible to use something like this:

  int count;
  char buffptr[100];
  FILE  *ser;
  ser = fopen("ttye","a+");
  while(1)
     {
        fd_set rfds;
        FD_ZERO(&rfds);
        FD_SET(ser->_FD, &rfds);
         int res = select(ser->_FD+1, &rfds, NULL, NULL, 500);
         if (res == -1) { USB_PRINTF("SELECT ERROR\n "); continue; }
         if (res == 0) { USB_PRINTF("SELECT TIMEOUT"); continue; }
         if (!FD_ISSET(ser->_FD, &rfds)) { USB_PRINTF("no FD_ISSET"); continue; }      
         count=read(ser->_FD,buffptr,99);
         USB_PRINTF("%d bytes\n",count);
        //DO_SOMETHING_WITH_DATA
        /* Let the other task run */
        _time_delay(1);
     }

(that I normaly use in linux) also in KSDK MQX , or is select() intended only for RTCS sockets?

select() in this example alway returns -1 to me, I also tried RTCS_ versions and it didn't help.

I know I can use blocking read() with 1 byte that would block me, but this way I could also find out that there nothing coming using select timeout.

For this example I would also need nonblocking read - opening file not using fopen(), but open() with O_NONBLOCK doesn't help here.

If it's too much trouble, I will stay with 1 byte blocking read

Thanks,

Martin

Re: select() on *FILE->_FD + nonblocking read

Martin_ — Fri, 20 Nov 2015 10:24:35 GMT

select() in Freescale MQX can work only with RTCS sockets.

topic select() on *FILE->_FD + nonblocking read in MQX Software Solutions

select() on *FILE->_FD + nonblocking read

Re: select() on *FILE->_FD + nonblocking read