topic Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1) in MQX Software Solutions

BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

razed11 — Fri, 19 Sep 2014 19:47:40 GMT

Hi,

I tried to clone the K64 FRDM BSP for IAR. It seemed to run to completion but when I open the build_libs workspace there are no files listed to compile. All the expected projects exist but they contain no files.

The BCW console output displayed the following assertion error 18 times:

Generating: BSP for iar

------------------------------------------------------------------------------------------------------------------------

ASSERTION FAILED:

message: unset param 'value'

------------------------------------------------------------------------------------------------------------------------

file : \<C:\Freescale\Freescale_MQX_4_1\tools\generator\project.exe>iar\common\CommonEwpFile.pm

line : 307

args :

args : unset param 'value'

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

DavidS — Tue, 23 Sep 2014 18:01:54 GMT

Hi Kenny,

Please review the MQX_BSP_Cloning_Wizard_GettingStarted.pdf in the following path:

C:\Freescale\Freescale_MQX_4_1_FRDMK64F\doc\tools

I'm guessing the step to generate the projects might have been missed.

Other useful reading.... the MQX_BSP_Porting_Guide.pdf and MQX_BSP_Porting_Example_User_Guide.pdf in the following path:

C:\Freescale\Freescale_MQX_4_1_FRDMK64F\doc\mqx

Regards,

David

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

soledad — Tue, 23 Sep 2014 22:57:50 GMT

Hi Kenny,

You are right. I can reproduce this issue; I will report this to the development team.

Thank you for your feedback!

Have a great day,
Sol

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

razed11 — Tue, 23 Sep 2014 23:27:48 GMT

I read through all of the documents. Maybe I missed something.

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

razed11 — Tue, 23 Sep 2014 23:29:45 GMT

Thank you for spending the time to reproduce this.

Will I have to clone manually? I guess I'll have to do this manually? I'll need to do this within a couple of weeks.

Kenny

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

DavidS — Tue, 23 Sep 2014 23:33:38 GMT

Hi Kenny,

I was able to Clone and build successfully the RTOS and also web_hvac demo. I've done this many times and the first couple I did miss a step to cause issues. Not saying you missed something as it could be Host OS, other software, phase of the moon, etc...

Before trying the manual approach I would re-try using the docs mentioned above.....and let us know.

I'll work with Sol off line to see what our differences are.

Regards,

David

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

razed11 — Tue, 23 Sep 2014 23:41:08 GMT

Thanks David. I'll have another look. It definitely was a workspace with empty projects.

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

LuisCasado — Wed, 24 Sep 2014 00:35:26 GMT

Hello,

Just an additional input. I think that the difference could be if you have a fresh MQX 4.1.1 installation or you have upgraded from MQX 4.1.0 to MQX 4.1.1. The cloning tool worked fine in MQX 4.1.0 and worked for me with MQX (upgrade), in that case MQX installer rewrite the old Freescale_MQX_4_1 folder.

Luis

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

razed11 — Wed, 24 Sep 2014 01:18:52 GMT

Good point. I have a fresh install.

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

williamely — Fri, 26 Sep 2014 22:10:27 GMT

I have the same issue with a clean install and an upgrade from 4.1.0.

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

razed11 — Wed, 08 Oct 2014 06:56:03 GMT

Any update on this? I have a board coming in next week and need to create my BSP.

Thanks,

Kenny

Re: Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

DavidS — Wed, 08 Oct 2014 13:37:30 GMT

Hi Kenny,

I haven't heard of an update on this issue but will ask.

I'm trying to load my "BSPCloningWizard" folder that goes in the "tools" folder. It is 53MBytes so may not load but I am going to try.

Please archive off your folder and try my folder....OK that didn't work :-( .

I'll try to send a link for you to get the ZIP file.

Regards,

David

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

razed11 — Wed, 08 Oct 2014 23:48:28 GMT

Hi Everyone,

The folder David sent did not solve the problem. I uninstalled everything (MQX 4.1.0 for FRDM), MQX 4.1.1 (where I attempted to clone), KDS, KSDK 1.0.0).

I then downloaded MQX 4.1.1 and installed again. After correcting the globals_full.yml (or whatever it was called) I tried to clone the FRDM64 and it failed in exactly the same way.

My board will arrive in two days and I have nothing to run on it. I'm not sure what else to do. I posted on September 19th. This problem was confirmed by at least one employee and one forum member. I also posted the error from the Perl script.

Incidentally, before I uninstalled everything I tried a clone from the MQX 4.1.0 FRDM install and it worked.

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

razed11 — Thu, 09 Oct 2014 02:37:00 GMT

Punted and used 4.0.1 (patched). Boo.

Re: BSP Cloning Wizard Fails with IAR (MQX 4.1.1)

tomassimicek — Tue, 02 Dec 2014 10:07:59 GMT

This was fixed in BSP Cloning Wizard patch for MQX 4.1.1 (available here https://www.freescale.com/webapp/sps/download/license.jsp?colCode=FSLMQXCW_4_1_1_OS).

Patch also adds support for the "Kinetis Design Studio" and fixes some bugs (e.g missing globals_full.yml or missing FFS support for K60/K70 boards) in the tool.