MQX Software SolutionsのトピックRe: RTCS TCP server socket doesn't accept the connection after disconnecting client 2 times

RTCS TCP server socket doesn't accept the connection after disconnecting client 2 times

pravinfalcao — Thu, 29 Jan 2015 11:31:53 GMT

Hi,

I have a TCP-IP server with two clients respectively on Port 81 and Port 82. Interesting thing is when I disconnect the client and reconnect, it works fine for exactly two times. However after trying to connect 3rd time, 'RTCS_selectset' throws an error message 'RTCS_SOCKET_ERROR' and connection fails permanently until I jump to RTCS/TCP-IP socket initialization.

However in field application, disconnection is frequent and I can not restart my K70 board if this happens. Again assume when Port 81 failed permanently after above scenario, Port 82 is still working fine with send-receive as it has not been disconnected - reconnected for 2 times. Can anyone help me in this?

E.g. One scenario

Port 81 - Connect (works) - Disconnect - Connect (works) - Disconnect - Connect (doesn't works). == Port 81 dead until re initialization of RTCS/TCP ==

Port 82 - Connect (works) - No Action - No Action - Disconnect - Connect (works) - No Action - Disconnect - Connect (doesn't works). == Port 82 dead until re initialization of RTCS/TCP ==

Re: RTCS TCP server socket doesn't accept the connection after disconnecting client 2 times

Carlos_Musich — Fri, 30 Jan 2015 01:13:44 GMT

Hi Pravin,

Probably you are setting a small number of sockets and the socket timeout is too long. Therefore, if you close all the sockets you have available and you don't wait until their timeout expires you will not be able to use another socket.

You can use function setsockopt() to manage sockets timeouts. These timeouts are declared in tcp_prv.h on the RTCS library project.

#define TCP_MSL	120000L /* Maximum Segment Lifetime; the
	longest time that a packet can
	travel in the Internet (2 min) */

#define TCP_WAITTIMEOUT (2 * TCP_MSL) /* timeout for TIME_WAIT state, defined

as 2 * MSL (4 min) */

#define TCP_SENDTIMEOUT_MIN 100000L /* as per RFC1122 4.2.3.5 */

#define TCP_OPENTIMEOUT_MIN 180000L /* as per RFC1122 4.2.3.5 */

But you can override these values with setsockopt().

You can also increase the number of sockets. It is possible customize runtime RTCS configuration before call the function RTCS_create() just as the web_hvac does in the C:\Freescale\Freescale MQX 4.1\demo\web_hvac\RTCS.c file.

/* runtime RTCS configuration */

_RTCSPCB_init = 4;

_RTCSPCB_grow = 2;

_RTCSPCB_max = 20;

_RTCS_msgpool_init = 4;

_RTCS_msgpool_grow = 2;

_RTCS_msgpool_max = 20;

_RTCS_socket_part_init = 4;

_RTCS_socket_part_grow = 2;

_RTCS_socket_part_max = 20;

I hope this helps.

Best regards,

Carlos

Technical Support Engineer

Re: RTCS TCP server socket doesn't accept the connection after disconnecting client 2 times

pravinfalcao — Mon, 02 Feb 2015 09:23:46 GMT

Hi Carlos,

Thanks a lot!! It works!!!

Best Regards,

Pravin

Re: RTCS TCP server socket doesn't accept the connection after disconnecting client 2 times

Carlos_Musich — Tue, 03 Feb 2015 17:07:34 GMT

Happy to help Pravin.

Regards,

Carlos