https://community.nxp.com/t5/MCX-Microcontrollers/i-MX-RT1010-Flashing-Issue/m-p/2390560#M5600 <P>Hello <a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/179888">@keerthisri123</a>,<BR />In order to support you better, could you provide me the next information?<BR />-Are you using the same external flash device as the RT1010-EVK? If not, could you please provide the part number of the flash device used on your custom board?<BR />-Which image are you attempting to program? Is it an SDK example or your own custom application?<BR />-Which tool are you using to program the device? For example MCUxpresso IDE, Secure provisioning tool, etc? <BR />-Are you connected through JTAG or SWD?<BR />If there are any additional details you believe could help, please do not hesitate to let me know.<BR />BR<BR />Habib</P> Fri, 03 Jul 2026 18:37:24 GMT Habib_MS 2026-07-03T18:37:24Z https://community.nxp.com/t5/MCX-Microcontrollers/i-MX-RT1010-Flashing-Issue/m-p/2390297#M5599 <P class=""><SPAN>I am using the @</SPAN><STRONG><SPAN>i.MX RT1010</SPAN></STRONG><SPAN> on a custom board and I'm facing a flashing issue.</SPAN></P><UL><LI><SPAN>All power rails are stable and within specification.</SPAN></LI><LI><SPAN>RESET pin is stable (HIGH after power-up).</SPAN></LI><LI><SPAN>The debugger detects the target, but flashing always fails.</SPAN></LI><LI><SPAN>I have already checked the hardware for shorts and soldering issues.</SPAN></LI></UL> Fri, 03 Jul 2026 10:01:14 GMT https://community.nxp.com/t5/MCX-Microcontrollers/i-MX-RT1010-Flashing-Issue/m-p/2390297#M5599 keerthisri123 2026-07-03T10:01:14Z https://community.nxp.com/t5/MCX-Microcontrollers/i-MX-RT1010-Flashing-Issue/m-p/2390560#M5600 <P>Hello <a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/179888">@keerthisri123</a>,<BR />In order to support you better, could you provide me the next information?<BR />-Are you using the same external flash device as the RT1010-EVK? If not, could you please provide the part number of the flash device used on your custom board?<BR />-Which image are you attempting to program? Is it an SDK example or your own custom application?<BR />-Which tool are you using to program the device? For example MCUxpresso IDE, Secure provisioning tool, etc? <BR />-Are you connected through JTAG or SWD?<BR />If there are any additional details you believe could help, please do not hesitate to let me know.<BR />BR<BR />Habib</P> Fri, 03 Jul 2026 18:37:24 GMT https://community.nxp.com/t5/MCX-Microcontrollers/i-MX-RT1010-Flashing-Issue/m-p/2390560#M5600 Habib_MS 2026-07-03T18:37:24Z