MCX MicrocontrollersのトピックRe: Does MCUXPresso IDE support third-part DAPLink debugger ？

Does MCUXPresso IDE support third-part DAPLink debugger ？

jimmyli — Mon, 26 Jan 2026 07:24:24 GMT

Hi NXP,

I find that the lasted MCUXpresso IDE only support MCU-Link/JLink/PEmicro, not for other third-part debuggers which are followed to ARM DAPLink (CMSIS-DAP V2), which can be supported by Keil and IAR.

This is very inconvenient for us and other customers to develop the projects.

So, does NXP plan to support other DAPLink debugger in MCUXpresso IDE ?

Thanks.

Re: Does MCUXPresso IDE support third-part DAPLink debugger ？

Celeste_Liu — Mon, 26 Jan 2026 09:22:21 GMT

Hello @jimmyli ,

Thanks for your post.

So, does NXP plan to support other DAPLink debugger in MCUXpresso IDE ?

->> Sorry, we don't have this plan. We recommend using MCU Link JTAG/SWD Debug Probe | NXP Semiconductors

Have a nice day.

Celeste

Re: Does MCUXPresso IDE support third-part DAPLink debugger ？

jimmyli — Tue, 27 Jan 2026 01:56:04 GMT

Hi Celeste,

Got it.

Thanks very much.

But, as said before, only supporting the three debuggers is limited to promote NXP MCUXpresso IDE in china.

Hope you can give a feedback internally.

Thanks again.

Re: Does MCUXPresso IDE support third-part DAPLink debugger ？

Celeste_Liu — Tue, 27 Jan 2026 02:03:56 GMT

Hello @jimmyli ,

Sure, I will share your suggestions with the internal.

Celeste

Re: Does MCUXPresso IDE support third-part DAPLink debugger ？

jimmyli — Wed, 28 Jan 2026 01:04:22 GMT

Hi Celeste,

Thanks very much.