MCX MicrocontrollersのトピックRe: FRDM-MCXA156 – mcuboot_opensource SDK Example Not Working in MCUXpresso

FRDM-MCXA156 – mcuboot_opensource SDK Example Not Working in MCUXpresso

CEPL_Dev — Thu, 14 Aug 2025 09:52:48 GMT

Hi,

I am currently working with the FRDM-MCXA156 board for evaluation of one of

our projects and using the SDK examples in MCUXpresso IDE.
I have tested basic examples such as:

These examples worked as expected.

However, while testing the frdmmcxa156_mcuboot_opensource example from the

same SDK, I encountered the following log message on the terminal:

I have followed the tutorial from the official documentation here:

Could you please suggest what might be causing this issue?

Alice_Yang — Thu, 14 Aug 2025 10:22:27 GMT

Thanks for your question.

Please use the two projects together: "mcuboot_opensource" and "ota_mcubot_basic".

For detailed steps, please refer to readme.md.

If still have issue, please show all your steps, I help you check.

Thank you.

Alice

marek-trmac — Thu, 14 Aug 2025 10:52:43 GMT

you can also use Secure Provisioning Tool, see step-by-step procedure described in the user guide: Generic workflows — MCUXpresso Secure Provisioning Tool 25.06