MCX MicrocontrollersのトピックMCPTE1AK116 PMSM FOC sample code error

MCPTE1AK116 PMSM FOC sample code error

Durgaprasad02 — Thu, 20 Mar 2025 08:08:59 GMT

i imported example from MCSPTE1AK116 but i got error(refer image)when i build project.

#MCPTE1AK116

Re: MCPTE1AK116 PMSM FOC sample code error

_Leo_ — Thu, 20 Mar 2025 17:42:17 GMT

Hi,

Thank you so much for your interest in our products and for using our community.

I must admit that I can't distinguish the text from your image. Please share a new one, preferably with a light theme, which is more distinguishable when sharing IDE screenshots.

Meanwhile, application software MCSPTE1AK116-SW Rev 1.1 works with S32DS for ARM 2.2 and SDK for S32K1xx 3.0.3.

Please make sure you are working with these versions.

Have a nice day!

Re: MCPTE1AK116 PMSM FOC sample code error

Durgaprasad02 — Fri, 21 Mar 2025 06:04:40 GMT

Hi Leo,

Error getting ;

Software version:

SDK Package :

Could please if any Motor control example code for S32k118.

thank you!!

Re: MCPTE1AK116 PMSM FOC sample code error

_Leo_ — Fri, 21 Mar 2025 17:45:14 GMT

Please download the following IDE and update from S32DS-ARM page -> Downloads section, in order to run the MCSPTE1AK116-SW Rev 1.1:

On the other hand, there is no such demo for S32K118, just for S32K116, for migration you just need to consider their differences in Feature comparison section of datasheet.

Re: MCPTE1AK116 PMSM FOC sample code error

Durgaprasad02 — Mon, 24 Mar 2025 17:24:27 GMT

Hi leo,

I've install S32 Design Arm Version below given error coming.

Re: MCPTE1AK116 PMSM FOC sample code error

_Leo_ — Mon, 24 Mar 2025 22:33:34 GMT

GFLIB is included in AMMCLIB. Please, set your library paths accordingly your files location in project settings.

Includes and also libraries paths:

Re: MCPTE1AK116 PMSM FOC sample code error

Durgaprasad02 — Tue, 25 Mar 2025 15:38:17 GMT

Hi Leo,

The settings are already as per your suggestion.

Re: MCPTE1AK116 PMSM FOC sample code error

_Leo_ — Wed, 26 Mar 2025 21:06:58 GMT

I hope it worked. Any other questions feel free to continue using our Technical Support Service.