topic Re: MCUXpresso Tools don´t support MCX A processor peripherals in MCX Microcontrollers

MCUXpresso Tools don´t support MCX A processor peripherals

berndgrossmann — Mon, 04 Nov 2024 13:19:46 GMT

I need a PWM on Pin 3.1 on MCX A153 processor.

In the config tool I can select this processor but most peripherals are not supported.

Example eFlexPWM: PWM driver is not found in the toolchain.

Is ther a way to add these drivers to the toolchain?

Re: MCUXpresso Tools don´t support MCX A processor peripherals

Pavel_Hernandez — Mon, 04 Nov 2024 18:16:12 GMT

Hello, my name is Pavel, and I will be supporting your case, I reviewed your question, but this is not enough clear, "PWM driver is not found in the toolchain".

If you are using the MCUXpresso need to select all the libraires and the toolchain.

Then when you have installed on the IDE you could import some examples from that like this.

Best regards,
Pavel

Re: MCUXpresso Tools don´t support MCX A processor peripherals

berndgrossmann — Fri, 08 Nov 2024 08:35:53 GMT

The solution is to go to Manage SDK components and select PWM SDK driver.

Re: MCUXpresso Tools don´t support MCX A processor peripherals

Pavel_Hernandez — Fri, 08 Nov 2024 22:33:41 GMT

Hello, the next information could help you.

I opened a blnky_led example where there is not any a PWM, so I select the MCUXpresso Configuration then on the pop-up window and type PWM.

Let me know if the information is not helpful maybe I do not understand.

Best regards,
Pavel

Re: MCUXpresso Tools don´t support MCX A processor peripherals

berndgrossmann — Mon, 11 Nov 2024 06:38:57 GMT

I posted the solution above