topic Re: USDHC Support in MCXN947 in MCX Microcontrollers

USDHC Support in MCXN947

JoseTepetla — Wed, 02 Oct 2024 23:02:34 GMT

Hi,

I'm trying to use the USDHC periphepal in the MCXN947VNL microcontroller, but the Pin Config tools displays errors when I change the package from MCXN947VDL (184 pins) to MCXN947VNL (100 pins). Do you know if there is support for this periphepal in ConfigsTool?

Also I tried running an example from the SDK in a FRDM-MCXN947, but it works fine on that board. The problem just shows when I switch the uC package

I tried with the latest sdk (v2.16.100 and 2.16.0) but it always shows the same error. Also I'm using MCUXpresso v11.10.0 - MacOs

If there is not support for this, can you please share if there is a guide to setup the peripheral?

Re: USDHC Support in MCXN947

Harry_Zhang — Wed, 09 Oct 2024 09:16:28 GMT

Hi @JoseTepetla

I try to reproduce this issue.

But when i change the package from MCXN947VNL (100 pins) to MCXN947VDL (184 pins).

It did not report how the error occurred.

Hang

Re: USDHC Support in MCXN947

JoseTepetla — Wed, 09 Oct 2024 14:22:40 GMT

Hi Hang,

Can you share me which versions of MCUXpresso and MCXN SDK are you using in your setup?

Actually I'm using this ones (SDK 2.16.100-MCXNxx and the SDK of the FRDM board)

Re: USDHC Support in MCXN947

JoseTepetla — Wed, 09 Oct 2024 14:57:34 GMT

@Harry_Zhang

I installed both versions of MCUConfigsTools (v15.1 and v16.1), in the latest one I can't find the USDHC peripheral. Do you know if there will not be more support for the latest version of the tools?

Re: USDHC Support in MCXN947

Harry_Zhang — Fri, 11 Oct 2024 03:43:17 GMT

Hi @JoseTepetla

My SDK version is also SDK 2.16.100-MCXNxx,

And my versions of MCUXpresso is MCUXpresso IDE v11.9.1_2170.

Hang

Re: USDHC Support in MCXN947

Harry_Zhang — Fri, 11 Oct 2024 03:45:47 GMT

Hi @JoseTepetla

If i use MCUXpresso ConfigsTools v16.1, I also can't find the USDHC peripheral.

I will report this issue to the MCUXpresso ConfigsTools IDE team.

Thanks for your information.

Hang