topic Re: QN9080DHN programming spec in MCU Bootloader

QN9080DHN programming spec

Leap_Electronic — Tue, 14 May 2019 01:22:13 GMT

This is Alex from Leaptronix.

We are the third party of programmer.

Could we apply QN9080DHN programming spec?

My email is: overseas@leap.com.tw

Thank you and have a good day.

Re: QN9080DHN programming spec

Alexis_A — Tue, 14 May 2019 20:44:42 GMT

Dear Alex,

The QN9080 use the SWD interface to program it but I'm not sure if this is what you mean.
Could you explain more about it?

Best Regards,

Alexis Andalon

Re: QN9080DHN programming spec

Leap_Electronic — Tue, 21 May 2019 02:17:08 GMT

Dear Alexis:

We need the document to know how to program the IC.

This document will have program detail.

Thank you and have a good day.

Re: QN9080DHN programming spec

Alexis_A — Wed, 22 May 2019 20:38:28 GMT

Hi Ryan,

There's this document: QN908x Production Flash Programming but this use the J-Link programmer as a base. Also you could look in the user guide, in the chapter 28. Flash memory controller, explains the process and commands to write in the memory flash.

I hope this can help you.

Best Regards,

Alexis Andalon