MCU BootloaderのトピックRe: hello everyone，when i used the blhost in linux system for bootloader,it always tell me&quot;UartPeripheral() cannot open PC UART port(COM1), speed(57600 Hz)&quot;,how can i do? https://community.nxp.com/t5/MCU-Bootloader/hello-everyone-when-i-used-the-blhost-in-linux-system-for/m-p/724835#M633 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>If you are using FRDM-K64 board or TWR-K64F board?</P><P></P><P>best regards,</P><P>Mike</P></BODY></HTML> Thu, 10 May 2018 07:15:49 GMT Hui_Ma 2018-05-10T07:15:49Z hello everyone，when i used the blhost in linux system for bootloader,it always tell me"UartPeripheral() cannot open PC UART port(COM1), speed(57600 Hz)",how can i do? https://community.nxp.com/t5/MCU-Bootloader/hello-everyone-when-i-used-the-blhost-in-linux-system-for/m-p/724834#M632 <HTML><HEAD></HEAD><BODY><P>bootloader for k64,with the blhost supplyed by nxp</P></BODY></HTML> Mon, 07 May 2018 06:11:09 GMT https://community.nxp.com/t5/MCU-Bootloader/hello-everyone-when-i-used-the-blhost-in-linux-system-for/m-p/724834#M632 dugg 2018-05-07T06:11:09Z Re: hello everyone，when i used the blhost in linux system for bootloader,it always tell me"UartPeripheral() cannot open PC UART port(COM1), speed(57600 Hz)",how can i do? https://community.nxp.com/t5/MCU-Bootloader/hello-everyone-when-i-used-the-blhost-in-linux-system-for/m-p/724835#M633 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>If you are using FRDM-K64 board or TWR-K64F board?</P><P></P><P>best regards,</P><P>Mike</P></BODY></HTML> Thu, 10 May 2018 07:15:49 GMT https://community.nxp.com/t5/MCU-Bootloader/hello-everyone-when-i-used-the-blhost-in-linux-system-for/m-p/724835#M633 Hui_Ma 2018-05-10T07:15:49Z Re: hello everyone，when i used the blhost in linux system for bootloader,it always tell me"UartPeripheral() cannot open PC UART port(COM1), speed(57600 Hz)",how can i do? https://community.nxp.com/t5/MCU-Bootloader/hello-everyone-when-i-used-the-blhost-in-linux-system-for/m-p/724836#M634 <HTML><HEAD></HEAD><BODY><P>Hi&nbsp;</P><P>I used the board we developed ourselves with the K64F12.</P><P>and i'm sure&nbsp;there is no problem with the board.because i was successful on win7 systems .</P></BODY></HTML> Mon, 14 May 2018 03:00:56 GMT https://community.nxp.com/t5/MCU-Bootloader/hello-everyone-when-i-used-the-blhost-in-linux-system-for/m-p/724836#M634 dugg 2018-05-14T03:00:56Z Re: hello everyone，when i used the blhost in linux system for bootloader,it always tell me"UartPeripheral() cannot open PC UART port(COM1), speed(57600 Hz)",how can i do? https://community.nxp.com/t5/MCU-Bootloader/hello-everyone-when-i-used-the-blhost-in-linux-system-for/m-p/724837#M635 <HTML><HEAD></HEAD><BODY><P style="color: #51626f; background-color: #ffffff; border: 0px;">Hi&nbsp;</P><P style="color: #51626f; background-color: #ffffff; border: 0px;">I used the board we developed ourselves with the K64F12.</P><P style="color: #51626f; background-color: #ffffff; border: 0px;">and i'm sure&nbsp;there is no problem with the board.because i was successful on win7 systems .</P></BODY></HTML> Mon, 14 May 2018 03:06:03 GMT https://community.nxp.com/t5/MCU-Bootloader/hello-everyone-when-i-used-the-blhost-in-linux-system-for/m-p/724837#M635 dugg 2018-05-14T03:06:03Z