MCU BootloaderのトピックRe: K02 Bootloader no start application after download

K02 Bootloader no start application after download

felipeoliveira — Thu, 12 Jan 2017 19:37:51 GMT

Hello all,

I´m using k02 - 128 Kb. I can connect and download firmware with KinetisFlashTool. But after download new firmware it no start, my hardware remains in bootloader firmware ( I put a toggle led to test this).

I do offset to 0xa000 in KinetisFlashTool and use led_demo_tower_a000. I test led_demo_tower_0000 and in this case I lost my bootloader. Because it I think that the problem are in memory map.

Re: K02 Bootloader no start application after download

felipeoliveira — Fri, 13 Jan 2017 12:33:40 GMT

I come here with more informations.

I am using both the firmware in release mode, Bootloader and led_blink. I am using IAR 7.5 with Kinetis Bootloader 2.0.

Re: K02 Bootloader no start application after download

kerryzhou — Wed, 18 Jan 2017 07:03:53 GMT

Hi Felipe Oliveira,

Please tell me the platform you are using and your operation step.

When you use the flashloader as the bootloader, you need to follow this step:

1. make sure you already install Python in your PC, you can download it from : www.pyhon.org

2. complier flashloader at first

3. complier flashloader_loader, and download it to your flash.

4, use KinetisFlashTool to download the .bin file in NXP_Kinetis_Bootloader_2_0_0\apps\led_demo\MK02F12810\iar\binaries\led_demo_tower_a000

Before you test led_demo_tower_a000, I suggest you test led_demo_tower_0000 on your board at first, whether it can work without the bootloader.

5. After download the app file with bootloader, then reset the board, wait a moment, check the app function.

Please try it again on your side.

Any question, please let me know!

Have a great day,
Kerry

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: K02 Bootloader no start application after download

felipeoliveira — Wed, 18 Jan 2017 11:45:56 GMT

Tnx for your reply Kerry Zhou.

My bootloader worked but no was easy.

I think that I find problems in firmware.

First: I use in my board UART0 and the exemple code have a "case" that no into in "case 0".

I need changer other points too to preparete firmware to UART0.

After it my bootloader work but it no jump to my application.

I solved it changing my project to KDS, because it have more interface features. With KDS I observed that BL_TARGER_FLASH macro was not being used. So I need change it.

Now my bootloader work in KDS, I still have make work in IAR.

Re: K02 Bootloader no start application after download

kerryzhou — Thu, 19 Jan 2017 02:32:10 GMT

Hi Felipe Oliveira,

Thank you for your solution sharing.

If you still have question in the IAR bootloader, you also can let me know!

Have a great day,
Kerry