LayerscapeのトピックRe: LS1043AQDS: u-boot binary

LS1043AQDS: u-boot binary

carlos-m-ribeiro — Tue, 11 May 2021 17:08:17 GMT

Hello,

Which flags/defconfig/configurations/files we need to compile and generate the u-boot binary spl-pbl (with rcw) to ls1043 qspi?

Best regards

Re: LS1043AQDS: u-boot binary

yipingwang — Wed, 12 May 2021 05:41:11 GMT

Please compile QSPI u-boot for ls1043aqds with configure file "ls1043aqds_qspi_defconfig" in u-boot source code. The generated u-boot image doesn't include RCW.

Re: LS1043AQDS: u-boot binary

carlos-m-ribeiro — Thu, 13 May 2021 09:20:20 GMT

Thank you for your response but how I can include RCW in u-boot binary with qpsi via menuconfig?

Best regards

Re: LS1043AQDS: u-boot binary

yipingwang — Fri, 14 May 2021 02:33:50 GMT

It is impossible to get QSPI u-boot binary image with RCW by compiling u-boot source code.

You could download flexbuild_lsdk2012, run command "$ flex-builder -c rcw -m ls1046aqds" to get QSPI RCW binary file rcw_1600_qspiboot.bin.swapped in packages/firmware/rcw/ls1046aqds/RR_FFSNPPPH_1133_5559/. Please deploy RCW at 0x00000000, u-boot at 0x00100000 on QSPI flash

Re: LS1043AQDS: u-boot binary

carlos-m-ribeiro — Fri, 14 May 2021 09:29:47 GMT

Thank you again, but you refer ls1046aqds, it is the same for ls1023/ls1043 (quad-core version)?

Best regards

Re: LS1043AQDS: u-boot binary

yipingwang — Mon, 17 May 2021 06:37:47 GMT

You could download flexbuild_lsdk2012, run command "$flex-builder -c rcw -m ls1043aqds" to get QSPI RCW binary file rcw_1600_qspiboot.bin.swapped in packages/firmware/rcw/ls1043aqds/RR_FQPP_1455/. Please deploy RCW at 0x00000000, u-boot at 0x00100000 on QSPI flash