topic Re: LS2088ARDB uboot problem in Layerscape

LS2088ARDB uboot problem

Hans-Bings — Mon, 26 Apr 2021 03:34:59 GMT

I earsed nor bank0 by mistake(SW9[3:5] 000), but when I change SW9[3:5] 100 to bank4, I boot board successfully.

I want to flash bank0 by uboot(boot from bank4), how can I do without using JTAG?

ufedor — Mon, 26 Apr 2021 04:29:03 GMT

Refer to the Layerscape Linux SDK Documentation:

Pre-built composite firmware image can be downloaded from:

section LSDK IMAGES

Hans-Bings — Mon, 26 Apr 2021 04:36:40 GMT

thanks a lot, I will try it!

Hans-Bings — Mon, 26 Apr 2021 06:30:37 GMT

after boot from bank4，I tftp the img successfully, but when I use

protect off 584000000 +$filesize

I got an error

Error: end address (0x5d653141f) not in flash!

Further Help please!!! thanks

ufedor — Mon, 26 Apr 2021 06:36:27 GMT

Complete log of operations including TFTP as textual attachment, please.