https://community.nxp.com/t5/Layerscape/How-to-program-an-empty-eMMC-with-LS1046A-Processor/m-p/1186817#M7047 <P>Hello,</P><P>I have a custom board with the LS1046A processor and a switch to select eMMC boot or SD Card boot.</P><P>SD card boot is ok.</P><P>I was wondering how to program the empty eMMC without ethernet. Is there a document which explain how to do? I did not find anything on your website but there are a lot of documents, maybe I did not find it.</P><P>Thank you</P> Fri, 20 Nov 2020 16:41:50 GMT maxime_guillot 2020-11-20T16:41:50Z https://community.nxp.com/t5/Layerscape/How-to-program-an-empty-eMMC-with-LS1046A-Processor/m-p/1186817#M7047 <P>Hello,</P><P>I have a custom board with the LS1046A processor and a switch to select eMMC boot or SD Card boot.</P><P>SD card boot is ok.</P><P>I was wondering how to program the empty eMMC without ethernet. Is there a document which explain how to do? I did not find anything on your website but there are a lot of documents, maybe I did not find it.</P><P>Thank you</P> Fri, 20 Nov 2020 16:41:50 GMT https://community.nxp.com/t5/Layerscape/How-to-program-an-empty-eMMC-with-LS1046A-Processor/m-p/1186817#M7047 maxime_guillot 2020-11-20T16:41:50Z https://community.nxp.com/t5/Layerscape/How-to-program-an-empty-eMMC-with-LS1046A-Processor/m-p/1186954#M7049 <P>It is recommended to use CodeWarrior Flash Programmer tool.</P> <P>Please refer to the attached presentation starting from page 28.</P> Sat, 21 Nov 2020 08:15:21 GMT https://community.nxp.com/t5/Layerscape/How-to-program-an-empty-eMMC-with-LS1046A-Processor/m-p/1186954#M7049 ufedor 2020-11-21T08:15:21Z