Help needed to deploy image from NXP Yocto BSP for LS1046afrwy

anderstietze — Wed, 01 Apr 2020 13:51:54 GMT

I am using the NXP Yocto Linux BSP SDK for a LS1046afrwy board which i have downloaded from

https://source.codeaurora.org/external/qoriq/qoriq-components/yocto-sdk

I am able to build the "fsl-image-networking" with success, but I cannot find any instructions how to deploy the output image to a SD card.

1) Is there any guide howto deploy the above image to an SD-card?

2) Are there any plans to update the yocto-sdk to the latest LSDK release. Last commit is almost 9 month old?

Thank you.

Re: Help needed to deploy image from NXP Yocto BSP for LS1046afrwy

Pavel — Mon, 06 Apr 2020 06:15:19 GMT

Use solution from the following page:

https://community.nxp.com/message/1292550?commentID=1292550&et=watches.email.thread#comment-1292550

NXP offers LSDK for the the LS1046ADRWY board:

https://nxp.flexnetoperations.com/control/frse/download?element=10958497

Use this LSDK for image building.

Have a great day,
Pavel Chubakov

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

LayerscapeのトピックRe: Help needed to deploy image from NXP Yocto BSP for LS1046afrwy

Help needed to deploy image from NXP Yocto BSP for LS1046afrwy

Re: Help needed to deploy image from NXP Yocto BSP for LS1046afrwy