topic Firmware for AQR105 used in LS1088A-RDB in Layerscape

Firmware for AQR105 used in LS1088A-RDB

carljones — Thu, 28 Feb 2019 08:17:20 GMT

Hello,

We are trying to create a network data storage product based on LS1088ARDB. Our board uses AQR105 similar to what the LS1088ARDB uses. However, we do not have the firmware content of the SPI flash connected to it. Can we request for the firmware used for AQR105 and instructions on how to burn it to the SPI flash via CodeWarrior for ARMv8?

By the way, the thread below is somewhat similar with our case

https://community.nxp.com/thread/493621

Best,

Re: Firmware for AQR105 used in LS1088A-RDB

Pavel — Fri, 01 Mar 2019 05:24:47 GMT

Address request about the AQR105 or AQR107 firmware to Aquantia support:

https://www.aquantia.com/support/

Look at Appendix A of the T1024RDB User Guide:

https://www.nxp.com/webapp/Download?colCode=T1024RDBUG

This document shows requirement for AQR firmware updating.

Have a great day,
Pavel Chubakov

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: Firmware for AQR105 used in LS1088A-RDB

carljones — Fri, 01 Mar 2019 05:38:36 GMT

Thank you for responding and providing links to relevant resources, Pavel.

Will do as advised.

Best,

Re: Firmware for AQR105 used in LS1088A-RDB

dswang — Mon, 09 Aug 2021 05:53:12 GMT

Hi Pavel,

Could you please provide the download addresses of the following three files, "added-source-codes-of-API-2.1.0.patch","AQ_API-fix-compile-error-for-API-2.1.0.patch"and "mdio-added-flash-command.patch".

Have a great day,

Dswang