Uart output

shunpinglin — Tue, 21 Nov 2017 06:45:56 GMT

hello,

Now, I write uart assemble code during the boot of ls1021atwr. But the uart don't ouput anything, I don't know any? do anyone have idea?

The following assemble code:

UART_LCR=0x21C0503
        UART_DLB=0x21C0500
        UART_DMB=0x21C0501
        UART_SND=0x21c0500
        UART_IER=0x21c0501
        UART_MCR=0x21c0504
        UART_FCR=0x21c0502

    LOOP1:
        ldr r3, =0x21c0505
        ldr r4, [r3]
        tst r4, #0x40
        bne LOOP1

        ldr r0, =(UART_IER)
        ldr r1, =0x00
        str r1, [r0]

        ldr r0, =(UART_MCR)
        ldr r1, =0x03
        str r1, [r0]

        ldr r0, =(UART_FCR)
        ldr r1, =0x07
        str r1, [r0]
        /*
         * setting line control register and
         * setting serial baud,including DLB and DMB
        */
        ldr r0, =(UART_LCR)
        ldr r1, =0X83
        str r1, [r0]

        ldr r0, =0XA3
        ldr r1, =(UART_DLB)
        str r0, [r1]

        ldr r0, =0X00
        ldr r1, =(UART_DMB)
        str r0, [r1]

        ldr r0, =(UART_LCR)
        ldr r1, =0X03
        str r1, [r0]
        /*
         * send data to send buffer
        */

        mov r0, #0x24
        ldr r1, =(UART_SND)
        str r0, [r1]

        mov r3, #100
    LOOP2:
        sub r3, r3, #1
        cmp r3, #0
        bne LOOP2

Re: Uart output

shunpinglin — Wed, 22 Nov 2017 01:14:02 GMT

one byte rｅgister,using ‘strb’ ｉｎｓｔｒｕｃｔｉｏｎ

LayerscapeのトピックUart output

Uart output

Re: Uart output