LayerscapeのトピックRe: LS1043ARDB use CWTAP debug https://community.nxp.com/t5/Layerscape/LS1043ARDB-use-CWTAP-debug/m-p/684601#M2647 <HTML><HEAD></HEAD><BODY><P>You need to update to version 11.2.5</P><P></P><P>Adrian</P></BODY></HTML> Thu, 06 Jul 2017 07:49:41 GMT addiyi 2017-07-06T07:49:41Z LS1043ARDB use CWTAP debug https://community.nxp.com/t5/Layerscape/LS1043ARDB-use-CWTAP-debug/m-p/684598#M2644 <HTML><HEAD></HEAD><BODY><P>How does LS1043ARDB use CWTAP to debug SPL step by step?</P></BODY></HTML> Wed, 05 Jul 2017 09:20:39 GMT https://community.nxp.com/t5/Layerscape/LS1043ARDB-use-CWTAP-debug/m-p/684598#M2644 zhoujianyun19 2017-07-05T09:20:39Z Re: LS1043ARDB use CWTAP debug https://community.nxp.com/t5/Layerscape/LS1043ARDB-use-CWTAP-debug/m-p/684599#M2645 <HTML><HEAD></HEAD><BODY><P>You have to install the latest CW update and check Chapter 8.1 from ARMv8_Targeting_Manual.pdf available into &nbsp;\Freescale\CW4NET_v2017.03\CW_ARMv8\ARMv8\Help\PDF\</P><P></P><P>Adrian</P></BODY></HTML> Wed, 05 Jul 2017 09:37:35 GMT https://community.nxp.com/t5/Layerscape/LS1043ARDB-use-CWTAP-debug/m-p/684599#M2645 addiyi 2017-07-05T09:37:35Z Re: LS1043ARDB use CWTAP debug https://community.nxp.com/t5/Layerscape/LS1043ARDB-use-CWTAP-debug/m-p/684600#M2646 <HTML><HEAD></HEAD><BODY><P>I refer to your documentation ARMv8_Targeting_Manual.pdf and use CWTAP debug SPL for LS1043ARDB. But when SPL run to board_init_f_init_reserve function,SPL exception exits.</P><P></P><P>My Codewarrior version is 11.11.1.</P></BODY></HTML> Thu, 06 Jul 2017 02:48:27 GMT https://community.nxp.com/t5/Layerscape/LS1043ARDB-use-CWTAP-debug/m-p/684600#M2646 zhoujianyun19 2017-07-06T02:48:27Z Re: LS1043ARDB use CWTAP debug https://community.nxp.com/t5/Layerscape/LS1043ARDB-use-CWTAP-debug/m-p/684601#M2647 <HTML><HEAD></HEAD><BODY><P>You need to update to version 11.2.5</P><P></P><P>Adrian</P></BODY></HTML> Thu, 06 Jul 2017 07:49:41 GMT https://community.nxp.com/t5/Layerscape/LS1043ARDB-use-CWTAP-debug/m-p/684601#M2647 addiyi 2017-07-06T07:49:41Z