LayerscapeのトピックRe: How To flash fresh FRDM-LS1012A with empty flash?

How To flash fresh FRDM-LS1012A with empty flash?

shyam_baldha — Tue, 27 Jun 2017 12:15:27 GMT

Hello Community,

1. How to Flash fresh FRDM-LS1012A board which is not having any binaries (RCW, U-BOOT, KERNAL IMAGE)? Exactly what are the tools needed and what procedure to follow?

2. Can some one point me to the documents, for how to use below listed tool for FRDM-LS1012A board:

- Code warrior

- Code warrior - TAP

- QCVS

3. Which tool is to be used for flashing CMSIS-DAP binary? and Information/documents to use that tool.

Thanks,

Shyam

Re: How To flash fresh FRDM-LS1012A with empty flash?

ufedor — Tue, 27 Jun 2017 13:36:54 GMT

Which exactly board is in question?

Re: How To flash fresh FRDM-LS1012A with empty flash?

shyam_baldha — Tue, 27 Jun 2017 13:49:14 GMT

LS1012A freedom board.

Re: How To flash fresh FRDM-LS1012A with empty flash?

ufedor — Tue, 27 Jun 2017 14:20:14 GMT

Why it is "fresh"?

It has to be fully programmed during manufacturing.

Re: How To flash fresh FRDM-LS1012A with empty flash?

shyam_baldha — Tue, 27 Jun 2017 14:26:33 GMT

We are Designing a customized board by taking reference of FRDM-LS1012A board with some few changes. So I need to do all booting processes to bring-up custom board which having empty flash.

Re: How To flash fresh FRDM-LS1012A with empty flash?

ufedor — Tue, 27 Jun 2017 15:15:21 GMT

Please create a Technical Case for each of the numbered sections - refer to the following link:

https://community.freescale.com/thread/381898