LayerscapeのトピックRe: Issue with Flexbuild 24.12

Issue with Flexbuild 24.12

shivam_kumar — Wed, 08 Oct 2025 09:44:12 GMT

Hello
We are facing several issues wrt flexbuild 24.12 . following are the issues we are facing

flexbuilder is not reflecting the changes made in rcw,linux and uboot in the generated image.
flexinstaller is not able to write into sd card . so we used mkwic to create a sd image and flash into sd card still the changes are not getting reflected.

We need a solution for this quickly

Re: Issue with Flexbuild 24.12

Oswalag — Fri, 10 Oct 2025 05:38:43 GMT

Hello,

What documentation are you following?

Re: Issue with Flexbuild 24.12

shivam_kumar — Sat, 11 Oct 2025 09:56:55 GMT

Hello
We are using Debian_LSDK_UG10155 and also flexbuild.md file present in docs section inside the LSDK 24.12

Thank you

Re: Issue with Flexbuild 24.12

shivam_kumar — Sat, 11 Oct 2025 09:55:44 GMT

Hello
Use wic command to generate a sd card image and flash using etcher

Thank you

Re: Issue with Flexbuild 24.12

Oswalag — Fri, 17 Oct 2025 13:59:23 GMT

Thank you.

I'm testing on my side, any update I'll inform you.

Re: Issue with Flexbuild 24.12

Oswalag — Fri, 31 Oct 2025 21:23:59 GMT

Please try to flash your image following the steps with flex-installer as explained in the document, I just did it and it works without any issue, if you are using an Ubuntu host you have to complete the steps to create a docker with Debian 12, it is also explained in the guide.

Please see my results below: