LS1021ATSN-PA kernel configuration

Talentyc — Fri, 22 Sep 2023 06:42:07 GMT

I followed the procedures below to start the board.

$ git clone https://github.com/openil/openil.git
$ cd openil
$ git checkout OpenIL-v1.11-202104 -b OpenIL-v1.11-202104

I changed debootstrap_ 1.0.95ubuntu0.8_ all to debootstrap_ 1.0.95ubuntu0.12_ all in env_setup file.

$ cd openil
$ make nxp_ls1021atsn_defconfig
$ make

$ sudo dd if=./sdcard.img of=/dev/sdx

LS1021A-TSN switch setting for SD card SW2 = 0b’111111

Then I entered "root" as the login name and Enter to access the root interface.

Next, I input "make linux-menuconfig", but it was invalid, there was no make command.

What should I do next?

The document I referred to is "Open Industrial User Guide Rev. 1.22, 04/2021".

Re: LS1021ATSN-PA kernel configuration

yipingwang — Wed, 27 Sep 2023 05:28:16 GMT

This command cannot be executed on the target board.