https://community.nxp.com/t5/Layerscape/REAL-TIME-EDGEV2-6-rootfs-fail/m-p/1718434#M13246 <P>Hi community</P><P>I tried to run real time edge v2.6 rootfs on ls1028 board. The attached file is the log; It shows some mounting error. Can anybody give me some ideas how to fix it and tell me what is the problem here?</P><P>Thanks</P><P>&nbsp;</P> Thu, 07 Sep 2023 06:03:40 GMT xinliwang 2023-09-07T06:03:40Z https://community.nxp.com/t5/Layerscape/REAL-TIME-EDGEV2-6-rootfs-fail/m-p/1718434#M13246 <P>Hi community</P><P>I tried to run real time edge v2.6 rootfs on ls1028 board. The attached file is the log; It shows some mounting error. Can anybody give me some ideas how to fix it and tell me what is the problem here?</P><P>Thanks</P><P>&nbsp;</P> Thu, 07 Sep 2023 06:03:40 GMT https://community.nxp.com/t5/Layerscape/REAL-TIME-EDGEV2-6-rootfs-fail/m-p/1718434#M13246 xinliwang 2023-09-07T06:03:40Z https://community.nxp.com/t5/Layerscape/REAL-TIME-EDGEV2-6-rootfs-fail/m-p/1719402#M13252 <P>Please try whether the pre-built image can work on your target board.</P> <P>$ zstd -d nxp-image-real-time-edge-ls1028ardb.wic.zst</P> <P>$ sudo dd if=./nxp-image-real-time-edge-ls1028ardb.wic of=/dev/sdx bs=1M</P> <P>conv=fsync</P> <P>I uploaded&nbsp;nxp-image-real-time-edge-ls1028ardb.wic.zst in this link <A href="https://support.nxp.com/s/case/5002p00002vUotCAAS/community-realtimeedgev26-rootfs-fail?language=en_US" target="_blank">https://support.nxp.com/s/case/5002p00002vUotCAAS/community-realtimeedgev26-rootfs-fail?language=en_US</A></P> Fri, 08 Sep 2023 08:52:40 GMT https://community.nxp.com/t5/Layerscape/REAL-TIME-EDGEV2-6-rootfs-fail/m-p/1719402#M13252 yipingwang 2023-09-08T08:52:40Z