LS1012A Failed to load 'boot/Image'

epoletaev — Wed, 16 Aug 2023 03:35:07 GMT

Hi,

I'm getting trouble to load ubuntu from flex-installer prepared medium.

So far I have one SD card from two dozens that boots without issues, but other cards and eMMC does not work well (have same error as below).

Prepare

root@localhost:~/ls1012/ls1012ardb# ./flex-installer.sh -i pf -d /dev/mmcblk1

/dev/mmcblk1: 30 GB

Partitioning /dev/mmcblk1 ...

Formatting partitions ...

Model: MMC KC3032 (sd/mmc)

Disk /dev/mmcblk1: 31.3GB

Sector size (logical/physical): 512B/512B

Partition Table: msdos

Disk Flags:

Number Start End Size Type File system Flags

1 71.3MB 2219MB 2147MB primary ext4

2 2220MB 2354MB 134MB primary ext4

3 2355MB 7724MB 5369MB primary ext4

4 7725MB 31.3GB 23.5GB primary ext4

partition and format /dev/mmcblk1 [Done]

root@localhost:~/ls1012/ls1012ardb#

root@localhost:~/ls1012/ls1012ardb# ./flex-installer.sh -i install -m ls1012ardb -b boot_LS_arm64_lts_5.15.tgz -f firmware_ls1012ardb_qspiboot.img -r rootfs_sdk2110_ubuntu_main_arm64.tgz -d /dev/mmcblk1

61877+1 records in

61877+1 records out

63362204 bytes (63 MB, 60 MiB) copied, 5.70644 s, 11.1 MB/s

Program firmware_ls1012ardb_qspiboot.img to /dev/mmcblk1 with offset 4K [Done]

Installing boot_LS_arm64_lts_5.15.tgz to /dev/mmcblk1p1 ...

Install boot_LS_arm64_lts_5.15.tgz in /dev/mmcblk1p1 [Done]

Installing rootfs_sdk2110_ubuntu_main_arm64.tgz to /dev/mmcblk1p4 ...

Install rootfs_sdk2110_ubuntu_main_arm64.tgz in /dev/mmcblk1p4 [Done]

setting UUID a7ee0e4a-6838-4909-ae72-a69752fddadf for boot partition /dev/mmcblk1p1 ...

syncing data ...

Installation completed successfully

Boot

=> set devnum 1

=> pri mmc_boot

mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi

=> run mmc_boot

switch to partitions #0, OK

mmc1(part 0) is current device

Scanning mmc 1:1...

Found U-Boot script /ls1012ardb_boot.scr

685 bytes read in 1 ms (668.9 KiB/s)

## Executing script at 80000000

Failed to load 'boot/Image'

Failed to load 'boot/fsl-ls1012a-rdb.dtb'

ERROR: Did not find a cmdline Flattened Device Tree

Could not find a valid device tree

SCRIPT FAILED: continuing...

libfdt fdt_check_header(): FDT_ERR_BADMAGIC

Scanning disk esdhc@1560000.blk...

Scanning disk esdhc@1580000.blk...

Found 10 disks

No EFI system partition

ERROR: invalid device tree

Scanning mmc 1:2...

libfdt fdt_check_header(): FDT_ERR_BADMAGIC

ERROR: invalid device tree

Scanning mmc 1:3...

libfdt fdt_check_header(): FDT_ERR_BADMAGIC

ERROR: invalid device tree

Scanning mmc 1:4...

libfdt fdt_check_header(): FDT_ERR_BADMAGIC

ERROR: invalid device tree

MMC boot partition content:

sda - SD card I used to copy flex-installer from

mmcblk0 - working ubuntu sd card

mmcblk1 - eMMC (32gb)

# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 1 14.7G 0 disk
mqsda1 8:1 1 14.7G 0 part
mtdblock0 31:0 0 128M 0 disk
mmcblk1 179:0 0 29.1G 0 disk
- mmcblk1p1 179:1 0 2G 0 part
- mmcblk1p2 179:2 0 128M 0 part
- mmcblk1p3 179:3 0 5G 0 part
- mmcblk1p4 179:4 0 22G 0 part
mmcblk1boot0 179:32 0 4M 1 disk
mmcblk1boot1 179:64 0 4M 1 disk
mmcblk0 179:96 0 15G 0 disk
- mmcblk0p1 179:97 0 2G 0 part /boot
- mmcblk0p2 179:98 0 128M 0 part
- mmcblk0p3 179:99 0 5G 0 part
- mmcblk0p4 179:100 0 7.8G 0 part /
root@localhost:~/ls1012/ls1012ardb# mount /dev/mmcblk1p1 /media/sda1
root@localhost:~/ls1012/ls1012ardb# ls -la /media/sda1/
total 60168
drwxr-xr-x 4 user user 4096 Aug 16 02:15 .
drwxr-xr-x 3 root root 4096 Aug 16 02:04 ..
-rw-r--r-- 1 user user 44870144 Aug 16 02:15 Image
-rw-r--r-- 1 user user 16639851 Aug 16 02:15 Image.gz
lrwxrwxrwx 1 root root 19 Aug 16 02:15 boot.scr -> ls1012ardb_boot.scr
-rw-r--r-- 1 user user 13580 Aug 16 02:15 fsl-ls1012a-qds-ls1012ardb.dtb
-rw-r--r-- 1 user user 13580 Aug 16 02:15 fsl-ls1012a-qds.dtb
-rw-r--r-- 1 user user 12626 Aug 16 02:15 fsl-ls1012a-rdb-ls1012ardb.dtb
-rw-r--r-- 1 user user 12626 Aug 16 02:15 fsl-ls1012a-rdb.dtb
drwx------ 2 root root 16384 Aug 16 02:14 lost+found
-rw-r--r-- 1 user user 685 Aug 16 02:15 ls1012ardb_boot.scr
drwxr-xr-x 3 user user 4096 Aug 16 02:15 modules

Re: LS1012A Failed to load 'boot/Image'

yipingwang — Wed, 16 Aug 2023 06:48:39 GMT

It seems that there is problem with your boot script ls1012ardb_boot.scr, in the bootscript, the content should be as the following.

setenv kernel_image Image

setenv dtb fsl-ls1012a-rdb.dtb

it should not fetch images in boot folder.

Re: LS1012A Failed to load 'boot/Image'

epoletaev — Thu, 17 Aug 2023 01:36:07 GMT

Thanks @yipingwang! You right, I was able to boot with the correct script.

I'm still trying to figure out how did I got this issue with my script...

Re: LS1012A Failed to load 'boot/Image'

epoletaev — Thu, 17 Aug 2023 03:02:05 GMT

It seems LSDK made such script for me

repo init -u https://github.com/nxp-qoriq/yocto-sdk -b kirkstone -m ls-5.15.71-2.2.0_distro.xml

repo sync

. setup-env -m ls1012ardb

cd ..

DISTRO=fsl-qoriq-distro MACHINE=ls1012ardb source distro-setup-env

bitbake fsl-image-lite

bitbake qoriq-composite-firmware

(I'm using older version of LSDK because specific driver sources are not compiles with the latest one)

topic Re: LS1012A Failed to load 'boot/Image' in Layerscape

LS1012A Failed to load 'boot/Image'

Re: LS1012A Failed to load 'boot/Image'

Re: LS1012A Failed to load 'boot/Image'

Re: LS1012A Failed to load 'boot/Image'