LayerscapeのトピックRe: Fetch failed when to try real-time-edge v2.6 for ls1028;

Fetch failed when to try real-time-edge v2.6 for ls1028;

xinliwang — Wed, 16 Aug 2023 02:44:37 GMT

Hi @yipingwang

I got an error when I try to bitbake nxp-image-real-time-edge v2.6 for ls1028 board;

for the url I try it on my browser and it pops 404 error like down below:

http://etherlab.org/download/ethercat/

it doesn't have this page?

Re: Fetch failed when to try real-time-edge v2.6 for ls1028;

Irene — Wed, 16 Aug 2023 15:11:41 GMT

Let me look into this issue.

Re: Fetch failed when to try real-time-edge v2.6 for ls1028;

Irene — Wed, 16 Aug 2023 19:07:02 GMT

Are you using the NXP release or something upstream? are you following the steps outlined in the attached document which can be found on the nxp.com website.

Re: Fetch failed when to try real-time-edge v2.6 for ls1028;

xinliwang — Wed, 16 Aug 2023 23:10:22 GMT

Hi @Irene

Yes, I just follow the step as reference menu told.

Did you check the link I post? I think there is no way i can fetch if the link doesn't work.

Re: Fetch failed when to try real-time-edge v2.6 for ls1028;

xinliwang — Mon, 21 Aug 2023 01:05:24 GMT

Hi, @Irene

Any ideas for my problem?

Re: Fetch failed when to try real-time-edge v2.6 for ls1028;

Irene — Wed, 23 Aug 2023 15:58:37 GMT

Which release are you used ? I don’t find “nxp-image-real-time-edge” in our 6.1.22 release.

Re: Fetch failed when to try real-time-edge v2.6 for ls1028;

xinliwang — Thu, 24 Aug 2023 00:19:54 GMT

Hi, @Irene

I don't get it what do you mean that you don’t find “nxp-image-real-time-edge”?

According to the reference menu RTEDGEYOCTOUG_Rev2.6 on page 8, Yocto Project build uses the bitbake command.

Re: Fetch failed when to try real-time-edge v2.6 for ls1028;

xinliwang — Mon, 28 Aug 2023 02:43:48 GMT

@Irene

I'm not the only person who has the same issue.

Please check the link https://github.com/nxp-real-time-edge-sw/yocto-real-time-edge/issues/7

Re: Fetch failed when to try real-time-edge v2.6 for ls1028;

Irene — Tue, 05 Sep 2023 14:20:02 GMT

Hello,

The tarball that you need can be found at:

www.nxp.com/lgfiles/updates/other/ethercat-1.5.2.tar.bz2

Regards,

Irene