LayerscapeのトピックRe: Restoring LS1021A-IOT

Restoring LS1021A-IOT

renaud — Tue, 28 Mar 2023 15:54:06 GMT

I have a LS1021A-IOT. it is failing to boot:

U-Boot SPL 2021.04+fsl+gae6f725a51 (Dec 08 2021 - 03:51:46 +0000)
Trying to boot from MMC1
No max bus width provided. Assume 8-bit supported.

I would like to restore it either booting from SD card or QSPI?

Where can I find the binaries and how to program them?

Re: Restoring LS1021A-IOT

SebastianG — Thu, 30 Mar 2023 19:55:09 GMT

Hi @renaud,

I hope this post fins you well,

Just to let you know that I'm still working on your questions, I will let you know as soon as I have any update.

Thank you for your patience

Best Regards,

Sebastian

Re: Restoring LS1021A-IOT

SebastianG — Fri, 31 Mar 2023 17:20:39 GMT

HI @renaud,

You can find the Binary for SD Card for the LS1021A-IoT in the following link:

https://www.nxp.com/design/designs/ls1021a-iot-gateway-reference-design:LS1021A-IoT

In the highlighted area of the following image you can find where you can download the BSP for LS1021A-IoT.

due to NXP didn't develop the software for your Board, please contact with WindRiver or TechNexion in order to get the binaries or BSP for the LS1021a-IoT.

Best Regards,

Sebastian