https://community.nxp.com/t5/Layerscape/Config-Tool-Support-for-Layerscape-Processors/m-p/1450231#M10463 <P>Is there any GUI based configuration tool for mapping pin peripherals on a layerscape processor (such as the LS1012A)? I don't see support for this in MCUXpresso, nor have I found any dedicated configuration tool/app for this purpose. Having something visual to play with would certainly help with our ongoing processor evaluation.</P><P>Thank You,</P><P>David</P> Wed, 27 Apr 2022 23:30:47 GMT dbmclaur 2022-04-27T23:30:47Z https://community.nxp.com/t5/Layerscape/Config-Tool-Support-for-Layerscape-Processors/m-p/1450231#M10463 <P>Is there any GUI based configuration tool for mapping pin peripherals on a layerscape processor (such as the LS1012A)? I don't see support for this in MCUXpresso, nor have I found any dedicated configuration tool/app for this purpose. Having something visual to play with would certainly help with our ongoing processor evaluation.</P><P>Thank You,</P><P>David</P> Wed, 27 Apr 2022 23:30:47 GMT https://community.nxp.com/t5/Layerscape/Config-Tool-Support-for-Layerscape-Processors/m-p/1450231#M10463 dbmclaur 2022-04-27T23:30:47Z https://community.nxp.com/t5/Layerscape/Config-Tool-Support-for-Layerscape-Processors/m-p/1450411#M10468 <P>I think I can scrap this question. Found another post on the subject for the QorIQ family. I was able to access the pin mux tool within a QCVS project and all is right with the world.</P><P><A href="https://community.nxp.com/t5/Layerscape/Pin-Mux-tool-for-QorIQ/td-p/498375" target="_blank">Pin Mux tool for QorIQ - NXP Community</A></P> Thu, 28 Apr 2022 05:09:53 GMT https://community.nxp.com/t5/Layerscape/Config-Tool-Support-for-Layerscape-Processors/m-p/1450411#M10468 dbmclaur 2022-04-28T05:09:53Z