topic Re: Pin Mux tool for QorIQ in Layerscape

Pin Mux tool for QorIQ

deepaknaiknavar — Wed, 25 May 2016 09:18:28 GMT

Does the QorIQ family have any Pin Mux tool that allows pin configuration of LS1021A processor?

I have searched but could not find it for QorIQ family.

If no, what would be the best possible way to go ahead. Thanks!!

addiyi — Wed, 25 May 2016 11:42:41 GMT

Please refer to www.nxp.com/qcvs. QCVS provides Pin Muxing Configuration tool for LS devices.

Adrian

deepaknaiknavar — Wed, 25 May 2016 12:23:06 GMT

Thanks a lot !! It looks this will solve the Problem..

deepaknaiknavar — Thu, 26 May 2016 08:19:01 GMT

Hi Adrian !

I have installed codewarrior for arm 7 (QorIQ) Ver 10.0.8.

But i cannot find QCVS option. Is there any help to access QCVS pin mapping tool?

addiyi — Thu, 26 May 2016 08:45:07 GMT

If you select QCVS to be installed from the install wizard you should see something as below:

If don't see the QorIQ Configuration Project, go to Help > Install New Software and use ARMv7 Main Updater Site to install QCVS

Make sure during installation now ccs.exe or cdde.exe are present in Task Manager.

Adrian

deepaknaiknavar — Thu, 26 May 2016 09:05:11 GMT

Thanks Adrian !!

I have reached untill here. Here, i see Pin Multiplexing option but it does not have complete pins.

Is it correct?

addiyi — Thu, 26 May 2016 09:12:12 GMT

From the QCVS project wizard, you should select Pin Muxing Configuration, like below:

After that, you have to select the PinMux component:

Adrian

deepaknaiknavar — Thu, 26 May 2016 09:36:29 GMT

Thats Great Help Adrian !!

Finally..the problem was because I do not have this component in the list :smileysad: