8-bit MicrocontrollersのトピックLC60: Debugging in Flash Emulation Routines

LC60: Debugging in Flash Emulation Routines

BasePointer — Thu, 01 Nov 2007 23:08:21 GMT

Hi,

I'm storing some data in flash via flash emulation.

I can't see the written data in Memory window in True-Time Simulator after working flash emulation routines. Is this normal? Or it means my routines may have some problems?

I'm using CW6.0, HCS08 C and CyclonePro.

Thank you.

BP.

Message Edited by BasePointer on 2007-11-01 06:27 PM

Re: LC60: Debugging in Flash Emulation Routines

Encoder — Fri, 02 Nov 2007 04:33:29 GMT

I find no problem to visualize Flash written blocks from running program on a MC9S08AW60 through BDM interface and USB multilink or the USB interface on the MC9S08AWDEMO board and CW5.1.

Obviously you must stop the program to navigate in the memory, but you can resume when done. Flash routine, when physically writing or erasing flash cannot be halted (or at least I didn't try).

Encoder

Re: LC60: Debugging in Flash Emulation Routines

BasePointer — Fri, 02 Nov 2007 17:00:32 GMT

Hi,

I think, it has some refresh problem.

Thanks.