8-bit MicrocontrollersのトピックRe: Help selecting ontroller - J1850/BDLC/LCD/StepperMotor

Help me in selecting the most suitable controller

balajiprabhakar — Thu, 27 Sep 2007 12:47:12 GMT

Hello,

I am not able to select the most suited 8-bit controller with the following facilities,

1. J1850-compatible byte data link communications module (BDLC)

2. LCD driver

3. Stepper motor driver - For this now I am using pulse width modulator.

I am using MC68HC908LJ24 for another project, but this controller will not support J1850.

Please help me in finding a suitable controller.

Re: Help selecting ontroller - J1850/BDLC/LCD/StepperMotor

Alban — Thu, 27 Sep 2007 20:40:03 GMT

Hello,

Very few MCU are compatible with this very very specific protocol.
The 16-Bit MCU MC9S12DJ128 covers J1850.

LCD could be dealt with via I/Os

Stepper motors are handled on the H family. So S12XHZ or older S12H.

Alban.

Re: Help selecting ontroller - J1850/BDLC/LCD/StepperMotor

balajiprabhakar — Fri, 28 Sep 2007 15:02:25 GMT

Hai Alban,

Thank you very much for the suggestion, but for my application a 16 bit controller is too much because the inputs that i give to the controller are very less in number and are less complex.

So can you suggest me any 8 bit controller with J1850 and pulse width modulator.

Re: Help selecting ontroller - J1850/BDLC/LCD/StepperMotor

Alban — Fri, 28 Sep 2007 15:21:23 GMT

Hello,

I can think about MC68HC908AS60A.
This product is widely used but may be expensive...

Alban.

Re: Help selecting ontroller - J1850/BDLC/LCD/StepperMotor

balajiprabhakar — Fri, 28 Sep 2007 15:27:16 GMT

Hi Alban,

Thank you very much. Will I be able to get any evaluation board for this controller if requested.

Re: HC908AS60A - J1850/BDLC - PWM

Alban — Fri, 28 Sep 2007 16:17:42 GMT

Hi Balaji,

It is a very difficult to say. This product is not brand new.
Depending on the volume you will need for your production, it may be possible...

Here is a list of development products from the website.

Any idea of your target application and number of pieces ?

Alban.

Re: HC908AS60A - J1850/BDLC - PWM

balajiprabhakar — Fri, 28 Sep 2007 17:12:48 GMT

Hai Alban,

Thank you very much, I will check on the link..........

Re: HC908AS60A - J1850/BDLC - PWM

balajiprabhakar — Fri, 28 Sep 2007 17:43:36 GMT

Hi Alban,

I am going to use this controller in two wheeler cluster with a custom made LCD and a stepper motor. Will the controller suggested by you be OK for this application.

Balaji.