topic Re: Looking for AN2295 bootloader for 68HC908KX8, too much information in 8-bit Microcontrollers

Looking for AN2295 bootloader for 68HC908KX8, too much information

oliver_sedlacek — Fri, 14 Sep 2007 04:25:20 GMT

I'm trying to load the bootloader described in AN2295 in to a 68HC908KX8. After searching the forums, I've downloaded the AN2295SW.zip but it doesn't contain anything I recognise as a burnable S19 file. Assuming the zip contains source, as a complete newcomer to Codewarrior, I also don't know which files to compile. Can anyone point me in the right direction?

Thanks in advance,

Oliver

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

J2MEJediMaster — Fri, 14 Sep 2007 22:25:19 GMT

When you expanded the archive file, you should have 3 directories. Go into the src directory, then into the KXEYGT sub-directory. In there you'll find some files and yet more subdirectories. In the bin directory, there are bunch of .abs, .s19, .map, and other files for the various builds of the loader. The file hc08sprg-kx8.abs.s19 might be the one you want. If you want to build the source, open the .mcp file in the KXEYGT folder and let CodeWarrior launch. This project file has the information CodeWarrior needs to locate the appropriate and linker files, and to build the image with the proper compiler/linker settings. HTH.

---Tom

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

oliver_sedlacek — Fri, 21 Sep 2007 16:01:30 GMT

Thanks Tom, but my download of AN2295SW doesn't contain any .S19 files. I've opened the project in codewarrier, and it builds with a warning (No stack defined). It's all very frustrating.

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

J2MEJediMaster — Fri, 21 Sep 2007 21:30:53 GMT

That's odd that my version of the 2295SW archive has the .s19 files, because I don't have the HC08 tools. (A situation that I'm working to correct.) In the meantime, I'm going to attach the .s19 with this and you can give that a try.

---Tom

hc08sprg-kx8.abs.s19

Message Edited by t.dowe on 2009-09-03 05:50 PM

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

oliver_sedlacek — Fri, 21 Sep 2007 22:21:20 GMT

Thanks for that. Now I just need to figure out how to launch the MON08 downloader in codewarrier. I'm finding codewarrier completely impenetrable

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

ok2ucx — Sat, 22 Sep 2007 03:09:32 GMT

Dears,

earlier releases of AN2295SW had S19 files included in the ZIP file AN2295SW. Later, all binaries were removed since they can be easily compiled once the respective mcp project is opened in CodeWarrior (even with limited ie. free edition).

Regards, Pavel Lajsner

AN2295 Developer :smileywink:

Freescale Czech Republic

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

oliver_sedlacek — Sat, 22 Sep 2007 17:37:51 GMT

That would be a fair point, but I can't get the project to compile with V5 of codewarrior. I've probably just made some stupid mistake.

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

ok2ucx — Mon, 24 Sep 2007 15:21:22 GMT

Hi, just tried to compile the current KX/GT/EY boootloader both under V5.1 and V6.0 CodeWarrior with free limited version and it compiles OK.

Just cleaned some sensless warnings, you can download attached version that will become a part of release 9.0 of AN2295SW anytime soon.

Regards, Pavel

hc08sprg-KXEYGT-release-8.99.exe.zip

Message Edited by t.dowe on 2009-09-03 05:49 PM

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

CecchiSandrone — Thu, 27 Sep 2007 23:58:30 GMT

For some strange reason I can't find AN2295SW zip file on freescale.com, using search function. Can you give me the direct link to the Serial Bootloader download? Thanks

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

Alban — Fri, 28 Sep 2007 00:17:16 GMT

Hello,
the search gives these results

Please click on the ZIP icon to get the zip file.

Cheers,
Alban.

Re: Looking for AN2295 bootloader for 68HC908KX8, too much information

CecchiSandrone — Fri, 28 Sep 2007 00:36:19 GMT

Thanks Alban, now it works. Now I have to compile the right Codewarrior project under src folder. I have a MC13213 Zigbee board, based on HCS08 family. From those folders, what is the right one to choose?

68HC908KX8 is not a MC13213 Zigbee board

Alban — Fri, 28 Sep 2007 01:18:04 GMT

Well,

You posted in this thread. And this thread + your post title is 68HC908KX8.
If it was another device, you would have created a new thread because you read the rules:

[IMPORTANT] Rules to post

Alban

2007-09-22 08:22 PM

A question on S08 and Zigbee will not be answered on this thread, here this is KX8.
If you have a question on MC13213 Zigbee board you create a new thread with appropriate subject.

Sorry, I don't want to sound boring, but members also need to make an effort for a Forum to work

Alban.