8-bit MicrocontrollersのトピックRe: Help needed in end device?

13192-SARD - Can you teach me about Beacon Tree Mode

insider — Sun, 02 Sep 2007 21:59:24 GMT

Hi, Spell. I'm andershen. Currently, I'm dealing with 13192-SARD boards. I plan to form a tree network using MAC codebase example project, MyStarNetwork. In BeeKit, it only provides coordinator and end device example. How do we create a router?

Thanks.

Best wishes,

andershen

--
Alban Edit: FSL Part Number in Subject line + split/moved to appropriate location.

Message Edited by Alban on 2007-09-03 09:11 PM

Re: Can you teach me about Beacon Tree Mode

Spell — Mon, 03 Sep 2007 15:15:22 GMT

This is my source code for a ZigBee router based on MC13192-SARD board, take a look on it and tell me if you have problems...

regards, Filippo

zrcustomapp2_sard.zip

Message Edited by t.dowe on 2009-09-22 11:39 AM

how does the router sends or routes the received data?

insider — Mon, 03 Sep 2007 22:31:17 GMT

Hi, thanks for your source code. But I do not know how the router, routes the received data without the App_TransmitData. Do you mind telling me how you route the data?

Anyway, are you still doing this zigbee? I'm planning to implement tree routing, but the freescale experts, they said it is very hard to do. What do you think?

Thanks.

Best wishes,

andershen

Re: how does the router sends or routes the received data?

Spell — Mon, 03 Sep 2007 22:42:55 GMT

I think....it's very very hard to do

What do you mean for 'route the data'?maybe when the router receive a packet and than forward it to another device?
However this function is implemented in the lower layer of the zigbee stack.

For use the complete zigbee potentia l suggest to you to use the Beestack codebase, but unfortunately this codebase doesn't still implement tree routing

regards, Filippo

Do I need to change anything in coordinator project?

insider — Wed, 05 Sep 2007 11:36:32 GMT

Hi. I have flashed your source code into the 13192-SARD board. But it cannot associate with the coordinator.

In the hyperterminal window, it shows that:

Press any switch on board to start running the application.
Sending the MLME-Scan Request message to the MAC...Done
Scan did not find a suitable coordinator

So, am I missing something? Do I need to make any changes in the coordinator's project?

Thanks.

Best wishes,
andershen

Re: Do I need to change anything in coordinator project?

Spell — Wed, 05 Sep 2007 13:55:56 GMT

Sorry but I don't remember... try to flash the coordinator project too

zpancustomapp2_13213.zip

Message Edited by t.dowe on 2009-09-22 11:38 AM

Do I need to change anything in end device project as well?

insider — Wed, 05 Sep 2007 20:41:12 GMT

Thanks. I can get the router to associate with the coordinator. But unfortunately I cant get the end device to associate with the router, can you send me your end device project as well?

Anyway, in hyperterminal window for router, it display some weird characters. Why does that happen?

Thanks.

Best Wishes,
andershen

Re: Do I need to change anything in end device project as well?

Spell — Wed, 05 Sep 2007 21:12:21 GMT

insider wrote:

Anyway, in hyperterminal window for router, it display some weird characters. Why does that happen?

Sometimes it happens me too, I think is a problem of hyperterminal. Try to use hyperaccess...

zedcustomapp2_13213.zip

Message Edited by t.dowe on 2009-09-22 11:37 AM

Help needed in end device?

insider — Thu, 06 Sep 2007 20:01:35 GMT

Hi, Spell. I have flash the end device program into my board. But in Mapp.c file, there is no #include "application.h", so I added it in. Still I cant get the end device to associate with the router. Am I missing something? By the way, you gave me the program is for 13213, is it suitable for 13192-SARD board?

Thanks.

Best wishes,
andershen

Re: Help needed in end device?

Spell — Fri, 07 Sep 2007 16:34:32 GMT

insider wrote:
you gave me the program is for 13213, is it suitable for 13192-SARD board?

Make a new project with beekit for your board and then change the MApp.c file with the new one.

Re: Help needed in end device?

Spell — Fri, 07 Sep 2007 16:36:16 GMT

insider wrote:
Hi, Spell. I have flash the end device program into my board. But in Mapp.c file, there is no #include "application.h", so I added it in. Still I cant get the end device to associate with the router. Am I missing something?

Try to read this thread:
http://forums.freescale.com/freescale/board/message?board.id=8BITCOMM&thread.id=7203

Still have problem with my router?

insider — Sun, 23 Sep 2007 16:16:37 GMT

Hi, spell. I still have problem with the router. Any suggetion of making a router using the MAC codebase?

Sorry for the inconvenient.

Re: Still have problem with my router?

Spell — Mon, 24 Sep 2007 14:26:18 GMT

Hi insider,
which kind of problem do you have?
Try to download the ZR_CustomApp that I have attached in page 1 and take a look to it.

Regards, Filippo

Re: Help needed in end device?

soumya — Mon, 01 Oct 2007 19:16:37 GMT

hi fillipo,
can u suggest me how to set the capability info array bits? the stack is sayin that its an array, but declares it as a normal variable.plz help

regards
soumya

Re: Help needed in end device?

Spell — Thu, 29 Oct 2020 08:45:17 GMT

hi soumya,
what do you intend for capability info?
However array bit mean that this field is a byte where every bit contain a different information, for example in MAC capability array if bit 1 is set the device is a router...

Code:

/* MAC capability sub fields  Bit 0: Alternative PAN Coordinator Capabilty  Bit 1: RouterOrEndDevice, 1:Router, 0: EndDevice  Bit 2: PowerSource, 1: Mains POwered, 0: Battery Operated  Bit 3: RxOnWhenIdle  Bit 4: Reserved  Bit 5: Reserved  Bit 6: MAC Security Capability  Bit 7: Allocate Address  */typedef uint8_t macCapabilityInfo_t;

Re: Help needed in end device?

soumya — Wed, 03 Oct 2007 13:26:04 GMT

hi fillipo,
thnx for ur reply. i want to do it as i am implementing static routing. actually i found capability info in my stack. can i pass it as an array? my changes for router are similar to you. that means i am in the right path.

Re: Help needed in end device?

soumya — Wed, 03 Oct 2007 13:56:09 GMT

and another thing is that, where to set is?

Re: Help needed in end device?

Spell — Wed, 03 Oct 2007 17:30:26 GMT

Sorry but I haven't understand what you are asking to me...

Re: Help needed in end device?

soumya — Wed, 03 Oct 2007 17:51:17 GMT

hi fillipo,
sorry for my foolish question. actually i am misunderstanding the capability info.but now resolved it and co-ordiantor is now sensing the router and the enddevice clearly
regards
soumya

Re: Help needed in end device?

insider — Wed, 03 Oct 2007 17:56:07 GMT

Hi, soumya. Are you doing the router for BeeStack or MAC codebase? Are you doing it in beacon or non-beacon-mode?

Thanks.

best wishes,

andershen